学习工作经历

1980年09月至 1984年07月 重庆大学冶金及材料工程系，工学学士。

1984年08月至1987年09月 洛阳船舶材料研究所，助理工程师。

1987年09月至1990年03月 哈尔滨工业大学材料科学与工程系，工学硕士。

1990年03月至1995年07月 哈尔滨工业大学材料科学与工程系，工学博士。

1991年10月至1992年08月 东北师范大学中国赴日本国留学生预备学校。

1992年09月至1995年04月 日本京都大学牧正志教授研究室。

1995年08月至1998年08月 丹麦国家实验室，访问研究员。

1998年09月至2006年12月 丹麦国家实验室，高级研究员。

2007年01月至2020年06月 丹麦技术大学/丹麦可持续能源国家实验室，高级研究员。

2011年04月至2011年12月 重庆大学材料科学与工程学院，教授。

2011年12月至2023年04月 重庆大学材料科学与工程学院，教授，院长。

2023年04月至今 重庆大学材料科学与工程学院，教授。

2017年09月至今 轻合金材料国际合作联合实验室，教授，主任。

2020年01月至今 重庆大学电子显微镜中心，教授，主任。

2023年01月至今 政协重庆市第六届委员会委员。

2023年06月至今 重庆市侨联第五届委员会兼职副主席。

表彰及奖励

荣誉表彰	授予单位	时间
国家特聘教授	中共中央组织部	2011年
全国模范教师[3]	人社部、教育部	2024年
国务院政府特殊津贴	国务院	2024年
中国侨界（创新人才）贡献奖[9]	中华全国归国华侨联合会	2014年
重庆市自然科学奖一等奖[8]	重庆市人民政府	2024年
重庆市学术技术带头人	重庆市人社局、市教委	2024年
重庆市十大科技进展[11]	重庆科技发展战略研究院	2024年
重庆市高校黄大年式教师团队[12]	重庆市教委	2023年
Microscopy Today Innovation Award[7]	美国显微镜学会	2012年
Invitation Fellow	日本学术振兴促进会	2013年
Invitation   Fellow	日本学术振兴促进会	2005年
李薰研究奖[13]	中国科学院金属所	2004年

主讲课程

《材料现代分析方法》等

主要研究方向

n 研究领域

（1） 基于电子显微镜和同步辐射光源的先进表征技术研发

（2） 金属强韧化机理与新材料开发

（3） 纳米金属强化理论

n 科研综述

黄晓旭围绕上述研究领域，开展了长期不懈的研究，取得了一系列创新性成果：

（1）拓展了同步辐射X射线衍射矢量追踪三维重构原理（Science 2004），发明了基于透射电镜的晶体取向三维重构技术，空间分辨率达 1nm（Science 2011），实现纳米尺度晶粒三维拓扑结构、晶体学取向、五参量晶界特征的无损定量表征（Science 2023）；开发了位错晶体学三维表征系列新技术（COSS&MS 2020），实现位错组态形貌学和晶体学参量三维高通量表征，开辟了三维晶体取向与三维位错组态定量研究新方向（Acta Student Awards），为材料基因工程发展提供数据支撑。开发的晶体取向三维重构技术的空间分辨率比同期的其他取向重构技术高三个数量级，入选美国材料研究学会 2011 年全球十大研究亮点；被诺贝尔化学奖获得者 Zewail 教授、英国皇家学会 Sir Thomas 院士等 16 位院士引用，认为突破二维表征技术瓶颈、首创了透射电镜三维取向重构技术，引领材料高通量表征新方向。欧洲科学院Cordier 院士认为三维位错重构实现了位错参数定量高精度表征，应用前景广泛。这些原创技术为下述科学发现和理论创新提供关键技术。

（2）对典型立方金属，系统研究了晶粒取向和尺寸、变形模式、应变量、应变速率和温度等参数对三维位错组态演变的影响，基于三维位错组态形貌学与晶体学特性定量统计分析（Scripta 2017，2018），发现并定义了三类具有不同位错界面晶体学特性的三维位错组态，揭示了晶粒取向决定三维位错组态演变的普适规律（Acta Mater 1998）。结合晶体塑性模型，揭示了塑性变形滑移位错与界面位错组分的关联性，阐明了三类三维位错组态的形成机制，建立了三维位错组态形貌学和晶体学参量与强度的定量模型（Phil Mag 2006）。德国科学院 Raabe 院士指出该研究在国际上首次系统地确定了变形微观结构及其与晶粒取向之间的内在关系；澳大利亚工程院 Hodgson 院士将黄晓旭关于三维位错组态的定义和分类以他原工作单位丹麦 Risø 国家实验室的名称称为“Risø 概念”；成果被写入 Elsevier 经典教材 Physical Metallurgy 等。英国皇家学会Hjörvarsson、美国科学院 Weitz、美国工程院 Kocks等 17 位院士在 Nature、Phys Rev Lett 和 Acta Mater 等论文引用指出，成果确定了三维位错组态与金属强度的定量关系，是适用于金属、无机非金属、胶体等晶体材料的普适理论。

（3）在超大应变塑性变形制备的纳米结构铝中，发现“加热退火导致硬化和塑性变形导致软化”反常现象，揭示了“加热退火降低位错源密度导致材料强化、塑性变形提高位错源密度导致材料软化”的微观机制，提出通过调控位错源密度提升金属强塑性的新策略（Science 2006）。Nature 资深编辑 Ball 专题评述“这一发现改变了对金属力学行为的一般认识”；美国工程院 Lavernia、欧洲科学院 Valiev 和Y.T. Zhu等院士在多个纳米金属体系中证实这一新机制，该思想引领国际纳米金属研究新方向。

首次实现纳米金属塑性变形三维原位研究，发现纳米晶在卸载过程中发生晶粒取向回转的反常现象，揭示了卸载过程中背应力驱动位错反向运动，导致晶粒取向回转的新机制（Science 2023），颠覆了金属塑性变形不可逆的传统认知，丰富和发展了纳米金属塑性变形理论。丹麦技术科学院 Poulsen 院士认为是纳米分辨三维晶体取向研究的代表工作；英国皇家工程院 Langdon 院士指出，该技术有望发现纳米金属更多未知变形行为。

在极限细化的纳米晶原位高压变形研究中，发现高压彻底抑制纳米金属细晶软化效应，将 Hall-Petch 强化效应从 15nm 拓展到 3nm，纳米晶镍获得 4.2GPa 屈服强度和 10.2GPa 流变应力，达到金属镍弹性模量的 1/20，接近其理论强度，实现纳米金属极限强化；揭示了高压抑制晶界滑动、促进晶内位错反应与存储的强化机制，创建了高压细晶强化新理论（Nature 2020）。美国科学院毛河光院士肯定“高压变形是调控材料极限性能的有效途径”；美国科学院Huajian Gao院士和法国技术科学院Jian Lv院士认为“是设计高性能纳米金属的新途径”。

成功开发出 GPa 级高强度钛合金（Science 2024）和极低温环境用钢（US Patent 10,597,742B2等）等高性能金属材料，部分材料在国产全温度场力学试验机关键低温部件制造等方面得到应用，实现国产替代。

近年来主持的主要科研项目

项目名称	项目类别	执行时间
先进结构材料多时空大尺寸跨尺度高通量表征技术及应用	国家重点研发计划项目	2021年-2025年
先进材料多维多尺度高通量表征技术	国家重点研发计划项目	2016年-2021年
基于晶界偏聚工程的纳米结构铝合金极限强化研究	国家自然科学基金重点项目	2022年-2026年
三维透射电子显微镜	国家重大仪器专项	2014年-2018年
先进材料基因组表征与调控学科创新引智基地	高等学校学科创新引智计划	2015年起
轻合金材料国际合作联合实验室	教育部国际联合实验室	2017年起
沈阳材料科学国家研究中心轻金属研究部	国家级研究基地	2019年起
材料基因组工程重庆市重点实验室	省部级实验室	2016年起

论文及专著

截至2025年8月，黄晓旭发表论文380余篇，含Nature 2篇、Science 7篇、Proceedings of the National Academy of Sciences of the United States of America（PNAS）1篇、Proceedings of The Royal Society A: Mathematical, Physical & Engineering Sciences 2篇、Nature Communication 4篇、Acta Materialia 40篇、Philosophical Magazine 11篇，他引超1.6万次，获得授权发明专利20余项[10]。

部分代表性学术论文如下。论文合集附后。

[1] J.Q. Zhang, Bermingham M.J., Otte J., Y.G. Liu, Z.Y. Hou, N. Yang, Y. Yin, Bayat M., W.K. Lin, X. Huang, StJohn D.H., Dargusch M.S. Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design, Science, 383(6683)(2024), 639-645.

[2] Q.Y. He, S. Schmidt, W.Q. Zhu, G.L. Wu, T.L. Huang, L. Zhang, D.J. Jensen, Z.Q. Feng, A. Godfrey, X. Huang. 3D microscopy at the nanoscale reveals unexpected lattice rotations in deformed nickel, Science, 382(6674)(2023), 1065-1069.

[3] L.H. Wang, Y. Zhang, Z. Zeng, H. Zhou, J. He, P. Liu, M.W. Chen, J. Han, D.J. Srolovitz, J. Teng, Y.Z. Guo, G. Yang, D.L. Kong, E. Ma, Y.L. Hu, B.C. Yin, X. Huang, Z. Zhang, T. Zhu, X.D. Han, Tracking the sliding of grain boundaries at the atomic scale, Science, 375(6586)(2022), 1261-1265;

[4] X.L. Zhou, Z.Q. Feng, L.L. Zhu, J.N. Xu, L. Miyagi, H.L. Dong, H.W. Sheng, Y.J. Wang, Q. Li, Y.M. Ma, H.Z. Zhang, J.Y. Yan, N. Tamura, M. Kunz, K. Lutker, T.L. Huang, D.A. Hughes, X. Huang, B. Chen, High-pressure strengthening in ultrafine-grained metals, Nature, 579(7797)(2020), 67-72;

[5] H.H. Liu, S. Schmidt, H.F. Poulsen, A. Godfrey, Z.Q. Liu, J.A. Sharon, X. Huang, Three-dimensional orientation mapping in the transmission electron microscope, Science, 332(6031)(2011), 833-834;

[6] Q. Yu, Z.W. Shan, J. Li, X. Huang, L. Xiao, J. Sun, E. Ma, Strong crystal size effect on deformation twinning, Nature, 463(7279)(2010), 335-338;

[7] L. Lu, X. Chen, X. Huang, K. Lu, Revealing the maximum strength in nanotwinned copper, Science, 323(5914)(2009), 607-610;

[8] X. Huang, N. Hansen, N. Tsuji, Hardening by annealing and softening by deformation in nanostructured metals, Science, 312(5771)(2006), 249-251;

[9] S. Schmidt, S.F. Nielsen, C. Gundlach, L. Margulies, X. Huang, D. Juul Jensen, Watching the growth of bulk grains during recrystallization of deformed metals, Science, 305(5681)(2004), 229-232;

[10] X.L. Wu, M.X. Yang, F.P. Yuan, G.L. Wu, Y.J. Wei, X. Huang, Y.T. Zhu, Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility, Proceedings of the National Academy of Sciences of the United States of America, 112(47)(2015), 14501-14505;

[11] T.B. Yu, N. Hansen, X. Huang, Recovery by triple junction motion in aluminium deformed to ultrahigh strains, Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, 467(2135)(2011), 3039-3065;

[12] J.A. Wert, X. Huang, F. Inoko, Deformation bands in a [110] aluminium single crystal strained in tension, Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, 459(2029)(2003), 85-108.

国际大会报告

担任国际会议主席/副主席15次，作国际大会报告和邀请报告60余次。

会议名称	报告类型	地点	年份
The 20th   International Conference on Strength of Materials	Plenary	日本京都	2025
第四届材料基因工程高层论坛	大会报告	中国绵阳	2020
10th   International Conference on Processing & Manufacturing of Advanced   Materials	Keynote	法国巴黎	2018
19th   International Microscopy Congress	Keynote	澳大利亚悉尼	2018

社会兼职

n 社会组织

时间	担任职务
2023年至今	重庆市侨联兼职副主席[14]
2023年至今	重庆市政协常委[15]
2011年至2014年	国务院侨办“海外专家咨询委员会”委员

n 学术组织&学术期刊

重庆大学学术委员会副主任

苏州国家实验室学术委员会委员

中国科学院学术委员会先进材料专门委员会委员[4]

重点新材料研发及应用国家科技重大专项产品首席专家

中国材料与实验团体标准委员会材料基因工程领域委员会委员

中国材料研究学会理事

中国金属学会理事[16]

重庆金属学会副理事长

The 2nd   International Conference on Heterostructured Materials会议主席[17]

The 8th   International Conference on Recrystallization and Grain Growth会议主席[18]

《Nano Materials   Science》副主编[19]

《Materials   Research Letters》编委

《中国科学：技术科学》中英文版编委[20]

《Journal of   Magnesium and Alloys》编委[21]

科研团队

领导“纳米金属与先进表征”团队， 团队由师生约100人组成，致力于纳米金属结构材料的微观结构设计、加工制备、定量表征和强韧化机理研究，同时自主研发基于电子显微镜和同步辐射光源的先进材料表征技术和装置。

参考资料

[1] 黄晓旭 重庆大学材料科学与工程学院

[2] 黄晓旭. 重庆大学纳米金属与先进表征课题组

[3] 2024年全国教育系统先进集体和先进个人拟表彰对象

[4] 第二届中国科学院学术委员会及其专门委员会组成人员

[5] 2023年中国科学院院士增选有效候选人名单

[6] 2025年中国科学院院士增选有效候选人名单

[7] 2012 Microscopy Today Innovation Awards

[8] 2023年度重庆市科学技术奖名单

[9] 关于颁发“第五届中国侨界贡献奖”的决定

[10] 中国知网专利检索黄晓旭

[11] 2023年度重庆市十大科技进展

[12] 第四批重庆市高校黄大年式教师团队公示

[13] 黄晓旭博士获李薰研究奖

[14] 重庆市第五次归侨侨眷代表大会

[15] 政协重庆市第六届委员会委员名单

[16] 中国金属学会

[17] 第二届国际异构材料会议

[18] 第八届再结晶与晶粒长大国际研讨会

[19] 《Nano Materials Science》期刊主页

[20] 《中国科学：技术科学》期刊主页

[21] 《Journal of Magnesium and Alloys》期刊主页

[22] 渝见好老师—重庆日报

黄晓旭教授论文合集（截至2025年9月14日）

2025

S. Colding-Fagerholt, S.B. Simonsen, P.S. Jørgensen, W.J. Zhang, X. Huang, S. Schmidt, L.T. Kuhn

3D Ion percolation path in gadolinium doped ceria nanofibres for solid oxide electrochemical cells

Scripta Materialia, 259(2025), 116545.

Q.W. Hu, Z. Yu, X.X. Fu, Z.X Zeng, P. Tang, C. L. Zheng, X. Huang

Assessing the achievable quantification accuracy of magnetic moments in noisy electron magnetic chiral dichroism spectra using modeling

Applied Physics Letters, 126(10)(2025), 102401.

P.Z. Cai, H. Li, L. Zhang, M. Wang, Z.Y. Hou, X. Huang

Simultaneous improvement of strength and ductility in an ultra-high strength pearlitic steel achieved by high density nano-carbides

Scripta Materialia, 258(2)(2025), 116517.

X. Luo, X.N. Wang, Y.P. Xia, G.L. Wu, Y. Cheng, T.B. Yu, P.J. Yan, Y.C. Xin, X. Huang

On the microstructural origin of yield point phenomenon and high work-hardening response in fine-grained Mg-3Gd alloy

Journal of Materials Science and Technology, 226(2025), 290-301.

S.H. Yoshida, R. Fu, W. Gong, T. Ikeuchi, Y. Bai, Z.Q. Feng, G.L. Wu, A. Shibata, N. Hansen, X. Huang, N. Tsuji

Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys

Acta Materialia, 283(2025), 120498.

Z.J. Liao, L. Zhang, X. Hou, X. Huang

Grain boundary segregation of solutes and associated plastic deformation mechanisms in nanocrystalline Al-Cu and Al-Mg alloys: A molecular dynamics study

Journal of Materials Research and Technology, 35(8)(2025), 25-36.

J.Q. Zhang, M. Bermingham, O. Joseph, Z.Y. Hou, N. Chi-Ho, K. Damon, X. Huang, Dargusch Matthew

Designing against ω phase embrittlement in additively manufactured Ti−13.5Mo metastable β titanium alloy through Sn additions

Additive Manufacturing, 97(2025), 104597.

Q. Liu, Y.J. Huang, L.F. Shuai, T.L. Huang, L Zhang, G.L. Wu, X. Huang

Enhanced Structural Refinement and Strengthening by Intermediate Annealing Process in a Nanostructured Al-4 %Cu Alloy

Materials Science and Engineering: A, 943(2025), 148790.

J.M. Fan, W.Y. Wang, Y Zhu, A. Godfrey, H.Q. Che, X. Huang

Depth-dependent Microstructural Observations Reveal the Role of Thermal Cycling on the Formation of a Hierarchical Dislocation Cell Structure During Selective Laser Melting of 316 L Stainless Steel

Acta Materialia, 296(2025), 121271.

2024

J.H. Ding, W.S. Xu, B.Y. Zhang, M. Wang, Y. Shi, H.J. Cao, X. Huang, Y. Hong, J. Luo, Y. Peng, H.Y. Pu, B. Wang

An arrayed giant electrorheological fluid damper with energy harvesting and tunable-damping capacity

IEEE/ASME Transactions on Mechatronics, (2024).

Z.J. Liao, L. Zhang, J.J. Xie, X. Huang

Atomic-scale investigation on the structures and mechanical properties of metastable grain boundaries in aluminum

Materials Today Communications, 41(2024), 110851.

J. Guo, C.L. Zhang, Z. Dana, X. Li, G.L. Wu, T.L. Huang, P. Wolfgang, X. Huang, J. Dorte

Competition between microstructural factors affecting growth of abnormally large grains in thin Cu foils

Acta Materialia, 281(2024), 120339.

X. Zhang, L. Zhang, Y.X. Wang, S. Yasushi, X. Huang

Predicting the grain boundary segregation energy of solute atoms in aluminum by first-principles calculation and machine learning

Materials Today Communications, 41(2024), 110326.

F.P. Hu, T.B. Yu, H. Chen, H. Chen, F. Han, D. Keshun, F.C. Qiu, W.D. Xie, X. Huang

Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension

Journal of Magnesium and Alloys, 12 (12)(2024), 5095-5107.

Y.G. Liu, J.Q. Zhang, R.M. Niu, B. Mohamad, Y. Zhou, Y. Yin, Q.Y. Tan, S.Y. Liu, H.J. Henri, M.Q. Li, X. Huang

Cairney Julie. Manufacturing of high strength and high conductivity copper with laser powder bed fusion

Nature Communications, 15(1)(2024), 1283.

J. Zhao, Z.Y. Hou, B. Wang, H. Yang, Y.R. Wang, Z.Y. Chang, L. Zhang, G.L. Wu, X. Huang

Effect of austenitizing temperature on variant selection of martensite transformation in a 2 GPa grade steel

Journal of Materials Research and Technology, 33(2024), 2794-2802.

R. Ding, Y.J. Yao, B.H. Sun, H. Guo, J. Zhang, Y. Shao, C. Zhang, W. Liu, G. Andy, Z.G. Yang, X. Huang, Y.C. Liu

Strong yet ductile steels via a heterogeneous phase transformation strategy

Scripta Materialia, 252(2024), 116274.

B. Guan, C. Chen, Y.C. Xin, J. Xu, B. Feng, X. Huang, Q. Liu

Predicting the Hall-Petch slope of magnesium alloys by machine learning

Journal of Magnesium and Alloys, 12(11)(2024), 4436-4442.

C. Li, W.X. Zhang, H.O. Yang, J. Wan, X. Huang, Y.Z. Chen

Microstructural origin of high strength and high strain hardening capability of a laser powder bed fused AlSi10Mg alloy

Journal of Materials Science and Technology, 197(2024), 194-206.

H. Chong, C.B. Wang, H.Y. Guo, S.L. Sun, W.J. Gong, X.X. Fu, X. Huang, S.Y. Ma, G. Liu, Q. Wang, W.B. Cui

Investigations on the crystallographic stacking disordering and properties of novel Ga-containing in-plane chemically ordered (Cr2/3R1/3)2GaC (R=Y, Tb - Lu) i-MAX phases

Acta Materialia, 277(2024), 120213.

L. Zhang, Z.H. Zhang, X. Zhang, S. Yasushi, X. Huang

Structural evolution and mechanical response of multiple Al Σ5(210) grain boundaries with segregation of solute atoms: First-principles study

Materialia, 37(2024), 102193.

B. Guan, L. Wang, Y.C. Xin, P.D. Wu, J. Xu, X. Huang, Q. Liu

Double-peak strain hardening behavior of Mg-1.2 wt.%Y alloy

International Journal of Plasticity, 179(2024), 104041.

H.Y. Pu, Y.Z. Wu, M. Wang, Y. Sun, J. Luo, H.J. Cao, X. Huang, J.H. Ding

An active geophone based on a magnetic spring design for low-frequency vibration measurement

Mechanical Systems and Signal Processing, 217(2024), 111521.

F. Han, X. Luo, M. Knut, G.L. Wu, Z.Y. Hou, X. Huang

Effect of initial grain size on the recrystallization behavior and recrystallization texture of a Mg-3Gd alloy

Journal of Materials Science and Technology, 188(2024), 169-182.

X.J. Cao, J.L. Zhao, L. Mao, Z. Sun, H.J. Cao, J. Luo, X. Huang, H.Y. Pu

Investigation of a 2-DOF GER fluid damper in cut mode

International Journal of Mechanical Sciences, 274(2024), 109258.

J.F. Zhang, X.Y. Pang, Y. Li, S.L. Wei, C. Yang, S.H. Pan, B.H. Sun, D.S. Zhou, X. Huang, D.L. Zhang, G.W. Qin

Tuning generalized planar fault energies to enable deformation twinning in nanocrystalline aluminum alloys

International Journal of Plasticity, 178(2024), 104018.

X. Chen, Y. Jing, J.L. Zhao, J. Deng, X.J. Cao, H.Y. Pu, H.J. Cao, X. Huang, J. Luo

Tunable shunting periodic acoustic black holes for low-frequency and broadband vibration suppression

Journal of Sound and Vibration, 580(2024), 118384.

Z. Liu, R.L. Xin, X. Huang

Twin variant selection criteria in magnesium alloy: a review

Journal of Materials Science, 59(22)(2024), 10058-10077.

J. Luo, Y.X. Liu, H.Y.Pu, S.J. Yuan, L. Hou, C.L. Zhang, J. Yi, Y. Qin, X. Huang

Modelling and analysis of the intersecting axis permanent magnet eddy-current coupler

IET Electric Power Applications, 18(6)(2024),681-692.

R. Fu, Z.Q. Feng, X. Huang

Orientation distribution and deviation behaviors of dislocation loops in a quenched Al-Cu alloy

Acta Materialia, 270(2024), 119837.

J.M. Fan, Y.Y. Zhu, W.Y. Wang, K. Chen, G. Andrew, T.B. Yu, X. Huang

Recovery of dislocation cell structures in 316L stainless steel manufactured by selective laser melting

Journal of Materials Research and Technology, 30(2024), 9472-9480.

S.J. Yuan, Y.J. Wu, D.P. Song, H.Y. Pu, L.S. Mou, L. Hou, J.L. Zhao, X.P. Li, J. Luo, J. Wu, X. Huang

High-static-low-dynamic stiffness isolator based on an electromagnetic negative stiffness spring with long linear stroke

Science China Technological Sciences, 67(3)(2024), 740-752.

W.H. Shen, M.L. Zhou, X.K. Wei, H.Q. Wang, B. Fang, C. Ji, X. Zhuang, W. Jason, J. Luo, H.Y. Pu, X. Huang, S.L. Wang, H.J. Cao, Y. Feng, T. Xiang, Z.W. Shang

A Blind Video Quality Assessment Method via Spatiotemporal Pyramid Attention

IEEE Transactions on Broadcasting, 70(1)(2024),251-264.

Q. Hu, X. Fu, Z. Zeng, J. Li, G. Liu, C. Zheng, L. Zhang, X. Huang

Electron knock-on damage effects on electron magnetic chiral dichroism of magnetic metals using cobalt as a model

Applied Physics Letters, 124(9)(2024), 092407.

J.Q. Zhang, Bermingham M.J., Otte J., Y.G. Liu, Z.Y. Hou, N. Yang, Y. Yin, Bayat M., W.K. Lin, X. Huang, StJohn D.H., Dargusch M.S

Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design

Science, 383(6683)(2024), 639-645.

Y.R. Wang, Z.Y. Hou, H. Yang, J. Zhao, Z.Y. Chang, F.M. Meng, L. Zhang, G.L. Wu, X. Huang

Effect of initial microstructure on microstructure evolution and mechanical properties of 0.12C martensitic steels during quenching and tempering

Journal of Iron and Steel Research International, (2024).

G. Wang, H.J. Zhang, F.H. Wang, H. Zhang, H.Y. Pu, X.L. Yang, X.P. Zhang, X. Huang, F. Wu, J. Luo

A Framework for Synchronous Extraction of Multitype Steel Mesh Features Based on Measured Point Clouds

IEEE Transactions on Instrumentation and Measurement, 73(2024), 3523312.

P.L.Wei, X. Liu, J. Luo, H.Y. Pu, X. Huang, S.L. Wang, H.J. Cao, S.H. Yang, X. Zhuang, Wang Jason, H. Yue, C. Ji, Zhou M

Transformer with a Parallel Decoder for Image Captioning

International Journal of Pattern Recognition and Artificial Intelligence, 38(1)(2024), 2354029.

H.Y. Yang, M.L. Zhou, Z.W. Shang, H.Y. Pu, J. Luo, X. Huang, S.L. Wang, H.J. Cao, X.K. Wei, W.Z. Xian

An End-to-End Video Coding Method via Adaptive Vision Transformer

International Journal of Pattern Recognition and Artificial Intelligence, 38(1)(2024), 2354023.

L.F. Shuai, T.L. Huang, T.B. Yu, G.L. Wu, X. Huang

Uncovering the role of nanoscale Si particles on  the thermal stability of  a lamellar-nanostructured Al-1%Si alloy

Materials Research Letters, 12(3)(2024), 208-216.

H.F. Zhang, K. Chen, S.C. Lin, R. Fu, B.Z. Zhang, J. Ding, Z.Q. Feng, X. Huang, Ma E

Recovery facilitated by interphase boundary motion circumvents recrystallization in superalloy single crystals

Materials Research Letters, 12(3)(2024), 180-189.

2023

W.Q. Zhu, X.B. Huang, W. Cai, T.L. Huang, G.L. Wu, X. Huang

3D characterization of abnormal grain growth in nanocrystalline nickel

Materials Genome Engineering Advances, 1(2)(2023), 1-13.

H.Y. Yang, M.L. Zhou, Z.W. Shang, H.Y. Pu, J. L, X. Huang, S.L. Wang, H.J. Cao, W.K. Wei, W.Z. Xian

An End-to-End Video Coding Method via Adaptive Vision Transformer

International Journal of Pattern Recognition and Artificial Intelligence, 38(1)(2023).

Q.Y. He, S. Schmidt, W.Q. Zhu, G.L. Wu, T.L. Huang, L. Zhang, D.J. Jensen, Z.Q. Feng, A. Godfrey, X. Huang

3D microscopy at the nanoscale reveals unexpected lattice rotations in deformed nickel

Science, 382(6674)(2023), 1065-1069.

A .Godfrey, X. Huang

Exceptionally high strain hardening via two-dimensional atomic scale faulting

Science China Materials, 66(12)(2023), 4897-4898.

M. Villa, F.B. Grumsen, F. Niessen, T. Dahmen, L.F. Cao, M. Reich, O. Kessler, X. Huang, M.A.J. Somers

Aging 17-4 PH martensitic stainless steel prior to hardening: effects on martensitic transformation, microstructure and properties

Materialia, 32(2023), 101882.

J. Xu, B. Guan, Y.C. Xin, X. Li, P.D. Wu, X. Huang, Q. Liu.

The mechanism for Li-addition induced homogeneous deformation in Mg-4.5wt.% Li alloy

International Journal of Plasticity, 170(2023), 103763.

Z.X. Zeng, X.X. Fu, Q.W. Hu, G. Liu, J.J. Li, X. Huang

The influence of residual plural scattering after deconvolution in electron magnetic chiral dichroism

Ultramicroscopy, 253(2023), 113806.

J. Guo, O.V. Mishin, Q.S. Mei, X. Huang, G.L. Wu

Deformation-induced contaminants and thermal stability variations in copper processed by high pressure surface rolling

Materials Letters, 349(2023), 134840.

X. Zhang, L. Zhang, Z.H. Zhang, X. Huang

Effect of solute atoms segregation on Al grain boundary energy and mechanical properties by first-principles study

Mechanics of Materials, 185(2023), 104775.

F. Han, H.X. Wang, X. Luo, Z.Y. Hou. G.L. Wu, X. Huang

Microstructure and texture evolution of hot-rolled Mg-3Gd alloy during recrystallization

Metal, 13(7)(2023), 1216.

W.X. Zhang, Y.Z. Chen, L. Zhou, T.T. Zhao, W.Y. Wang, F. Liu, X. Huang

Simultaneous increase of tensile strength and ductility of Al-Si solid solution alloys: The effect of solute Si on work hardening and dislocation behaviors

Materials Science and Engineering: A, 869(2023), 144792.

Z. Liao, L. Zhang, X. Huang, D.J. Jensen

Microstructural and textural gradients in SLM-manufactured AlSi10Mg after low-draught cold-rolling and heat treatment

Journal of Physics: Conference Series, 2635(1)(2023), 012038.

S.Q. Chen, X.Y. Huang, L.F. Shuai, G.L. Wu, T.L. Huang, X. Huang

Annealing behavior of AlSi10Mg alloy fabricated by laser powder bed fusion

Journal of Physics: Conference Series, 2635(1)(2023), 012036.

J.M. Fan, W.Y. Wang, Y.Y. Zhu, Q. Liu, S.Q. Chen, A. Godfrey, H.Q. Che, X. Huang

TEM observations of variation of dislocation cell structures along the building direction in SLM-316L stainless steel

Journal of Physics: Conference Series, 2635(1)(2023), 012037.

J. Guo, C.L. Zhang, X. Li, T.L. Huang, G.L. Wu, H.F. Shi, D.J. Jensen, X. Huang

Abnormal grain growth in thin copper foils during high-temperature annealing

Journal of Physics: Conference Series, 2635(1)(2023), 012035.

F. Han, X. Luo, Q. Liu, Z. Hou, K. Marthinsen, G.L. Wu, C. Hatzoglou, P. Kontis, X. Huang

The effect of grain size and rolling reduction on microstructure evolution and annealing hardening response of a Mg-3Gd alloy

Journal of Magnesium and Alloys, (2023).

J. Xu, B. Guan, Y.C. Xin, X. Li, P.D. Wu, X. Huang, Q. Liu

The Mechanism for Li-addition Induced Homogeneous Deformation in Mg-4.5 wt. % Li Alloy

International Journal of Plasticity, 170(2023), 103763.

B.Guan, C. Chen, Y.C. Xin, J. Xu, B. Feng, X. Huang, Q. Liu

Predicting the Hall-Petch slope of magnesium alloys by machine learning

Journal of Magnesium and Alloys, (2023).

X. Zhang, L. Zhang, Z.H. Zhang, X. Huang

Effect of solute atoms segregation on Al grain boundary energy and mechanical properties by first-principles study

Mechanics of Matrials, 185(23)(2023), 104775.

M. Villa, F.B. Grumsen, F. Niessen, T. Dahmen, L.F. Cao, M. Reich, O. Kessler, X. Huang, M. Somers

Aging 17-4 PH martensitic stainless steel prior to hardening: effects on martensitic transformation, microstructure and properties

Materialia, 32(9)(2023), 101882.

Z.X. Zeng, X. Fu, Q. Hu, G. Liu, J. Li, X. Huang

The influence of residual plural scattering after deconvolution in electron magnetic chiral dichroism

Ultramicroscopy, 253(1)(2023), 113806.

2022

X. Li, G.L. Wu, L. Zhang, D.P. Huang, Y.Q. Li, R.Q. Zhang, M. Li, L. Zhu, J. Guo, T.L. Huang, J. Shen, X.Z. Wei, K.M. Yu, J.C. Dong, M.S. Altman, R.S. Ruoff, Y.W. Duan, J. Yu, Z.J. Wang, X. Huang, F. Ding, H.F. Shi, W.X. Tang.

Single-crystal t wo-dimensional material epitaxy on tailored non-single-crystal substrates

Nature Communications, 13(1)(2022), 1773.

X. Luo, F. Han, T.L. Huang, G.L. Wu, X. Huang

Microstructure and Mechanical Properties of Layered Heterostructured Mg-3Gd Alloy

Metallurgica Sinica, 58(11)(2022), 1489-1496.

Y. Y. Zhu, W. Pan, Y.Y. Li, T.L. Huang, Y.Z. Zhang, X. Huang

The heterogeneous microstructure in an Al-Zn-Mg-Cu-Sc-Zr alloy produced by selective laser melting

Materials Science and Engineering, 1249(2022), 012024.

W.Q. Zhu, R. Yang, Z.Q. Feng, G.L. Wu, A. Godfrey, X. Huang

3D characterization of a nanostructured Al-Cu-Mg alloy

Materials Science and Engineering, 1249(2022), 012029.

W.Q. Zhu, G.L. Wu, A. Godfrey, S. Schmidt, Q.Y. He, Z.Q. Feng, T.L. Huang, L. Zhang, X. Huang

Five-parameter grain boundary character distribution of gold nanoparticles based on three-dimensional orientation mapping in the TEM

Scripta Materialia, 214(2022), 114677.

S.S. Zhang, H.Q. Du, Z.J. Yao, Z.L. Liu, Y.Y. Zhu, L.F. Shuai, T.L. Huang, X. Huang, X.W. Tao, D.P. Mondal, T. Akopyan, N. Belov

Superior high temperature creep resistance of a cast Al-Mg-Ca-Sc alloy with multi-scale hierarchical microstructures

Materials Science and Engineering: A, 850(2022), 143533.

L. Zhang, Z.H. Zhang, X. Zhang, X. Huang

Computational simulation of grain boundary segregation of solute atoms in nanocrystalline metals

Journal of Materials Research and Technology, 21(2022), 161-185.

L. Zhang, P. Cai, X. Cheng, L. Zhang, Z. Hou, X. Huang

Microstructure and mechanical properties of a 0.1C5Mn3Al steel fabricated by warm drawing

Materials Science and Engineering, 1249(2022), 012058.

J.Q. Zhang, Y.G. Liu, G. Sha, S.B. Jin, Z.Y. Hou, M. Bayat, N. Yang, Q.Y. Tan, Y. Yin, S.Y. Liu, J.H. Hattel, M. Dargusch, X. Huang, M.X. Zhang

Designing against phase and property heterogeneities in additively manufactured titanium alloys

Nature Communications, 13(1)(2022), 4660.

R. Yang, Z.Q. Feng, T.L. Huang, G.L. Wu, A. Godfrey, X. Huang

Unprecedented age-hardening and its structural requirement in a severely deformed Al-Cu-Mg alloy

Scripta Materialia, 206(2022), 114240.

S.H. Yoshida, R. Fu, W. Gong, T. Ikeuchi, Y. Bai, Z.Q. Feng, G.L. Wu, A. Shibata, N. Hansen, X. Huang, N. Tsuji

Grain orientation dependence of deformation microstructure evolution and mechanical properties in face-centered cubic high/medium entropy alloys

Materials Science and Engineering, 1249(2022), 012027.

J.C. Xiong, Y.H. Wang, Y.B. Zhang, T.S. Wang, Y. Peng, A. Godfrey, N. Hansen, X. Huang

Tailoring the microstructure to enhance the cryogenic mechanical properties of a Fe-34.5Mn-0.04C steel

Materials Science and Engineering: A, 853(2022), 143769.

K. Wu, X. Fu, W. Zhu, X. Huang

Atomic-scale investigation on the origin of in-plane variants in L1(0)-FePt nanoparticles embedded in a single-crystalline MgO matrix

Journal of Applied Physics, 132(17)(2022), 175305.

L.H. Wang, Y. Zhang, Z. Zeng, H. Zhou, J. He, P. Liu, M.W. Chen, J. Han, D.J. Srolovitz, J. Teng, Y.Z. Guo, G. Yang, D.L. Kong, E. Ma, Y.L. Hu, B.C. Yin, X. Huang, Z. Zhang, T. Zhu, X.D. Han

Tracking the sliding of grain boundaries at the atomic scale

Science, 375(6586)(2022), 1261-1265.

X. Li, G.L. Wu, L.N. Zhang, D.P. Huang, Y.Q. Li, R.Q. Zhang, M. Li, L. Zhu, J. Guo, T.L. Huang, J. Shen, X.Z. Wei, K.M. Yu, J.C. Dong, M.S. Altman, R.S. Ruoff, Y.W. Duan, J. Yu, Z.J. Wang, X. Huang, F. Ding, H.F. Shi, W.X. Tang

Single-crystal two-dimensional material epitaxy on tailored non-single-crystal substrates

Nature Communications, 13(1)(2022), 1773.

D.P. Huang, Y.W. Duan, L.N. Zhang, X. Li, Y.N. Zhang, F. Ding, J. Guo, X. Huang, Z.C. Li, H.F. Shi

Graphene growth across the twin boundaries of copper substrate

Advanced Functional Materials, 32(42)(2022), 2202415.

J. Guo, X. Li, G.L. Wu, R.Q. Zhang, T.L. Huang, H.F. Shi, C.L. Zhang, D. Juul Jensen, X. Huang

Texture in cold rolled and high-temperature annealed Cu foils

Materials Science and Engineering, 1249(2022), 012052.

J. Guo, Q.Y. He, Q.S. Mei, X. Huang, G.L. Wu, O.V. Mishin

Gradient microstructure, recrystallization and mechanical properties of copper processed by high pressure surface rolling

Journal of Materials Science & Technology, 126(2022), 182-190.

B. Guan, Y.C. Xin, X. Huang, C.L. Liu, P.D. Wu, Q. Liu

The mechanism for an orientation dependence of grain boundary strengthening in pure titanium

International Journal of Plasticity, 153(2022), 103276.

S.Q. Chen, Q.Y. Tan, W.Q. Gao, G.L. Wu, J.M. Fan, Z.Q. Feng, T.L. Huang, A.W. Godfrey, M.X. Zhang, X. Huang

Effect of heat treatment on the anisotropy in mechanical properties of selective laser melted AlSi10Mg

Materials Science and Engineering: A, 858(2022), 144130.

S.Q. Chen, G.Q. Ma, G.L. Wu, A. Godfrey, T.L. Huang, X. Huang

Strengthening mechanisms in selective laser melted 316L stainless steel

Materials Science and Engineering: A, 832(2022), 142434.

2021

W.Q. Zhu, G.L. Wu, T.L. Huang, S. Schmidt, L. Zhang, Z.Q. Feng, J.N. Deng, X. Huang

Three-dimensional characterization of morphology and crystallography of a gold nanoisland film

Materials Science Forum, 1016(2021), 1778-1783.

L.Y. Zhao, B. Guan, Y.C. Xin, X. Huang, C.L. Liu, P.D. Wu, Q. Liu

A quantitative study on mechanical behavior of Mg alloys with bimodal texture components

Acta Materialia, 214(2021), 117013.

T.B. Yu, Y. Du, G.H. Fan, R.Q. Xu, R. Barabash, N. Hansen, X. Huang, Y.B. Zhang

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites

Acta Materialia, 202(2021), 149-158.

C.J. Yan, Y.C. Xin, X.B. Chen, D.K. Xu, P.K. Chu, C.Q. Liu, B. Guan, X. Huang, Q. Liu

Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins

Nature Communications, 12(1)(2021), 4616.

Y.H. Wang, Y.B. Zhang, A. Godfrey, J.M. Kang, Y. Peng, T.S. Wang, N. Hansen, X. Huang

Cryogenic toughness in a low-cost austenitic steel

Communications Materials, 2(1)(2021), 44.

L.F. Shuai, T.L. Huang, T.B. Yu, G.L. Wu, N. Hansen, X. Huang

Segregation and precipitation stabilizing an ultrafine lamellar-structured Al-0.3%Cu alloy

Acta Materialia, 206(2021), 116595.

X.J. Jiang, S. Gao, L. Zhang, G.L. Wu, X. Huang, N. Tsuji

Microstructure, texture and mechanical properties of sandwiched ARB6/2/6 2N Al fabricated by accumulative roll bonding

Materials Science and Engineering: A, 817(2021), 141356.

R. Fu, Z.Q. Feng, X. Huang

Three-Dimensional Characterization Techniques of Dislocations

Materials China, 40(6)(2021), 417-426.

C.Y. Ren, L. Jiang, J.W. Kou, S. Yan, L. Li, M.T. Liu, X.H. Dong, K. Chen, Z.L. Li, Z.J. Li, X. Huang, R.Z. Tai

Development of micro-Laue technique at Shanghai Synchrotron Radiation Facility for materials sciences

Science China-Materials, 64(9)(2021), 2348-2358.

D.Y. Li, G.H. Fan, X. Huang, D. Juul Jensen, K.S. Miao, C. Xu, L. Geng, Y.B. Zhang, T.B. Yu

Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers

Acta Materialia, 206(2021), 116627.

X.J. Jiang, S. Gao, L. Zhang, G.L. Wu, X. Huang, N. Tsuji

Microstructure, texture and mechanical properties of sandwiched ARB6/2/6 2N Al fabricated by accumulative roll bonding

Materials Science and Engineering: A, 817(2021), 141356.

2020

X.L. Zhou, Z.Q. Feng, L.L. Zhu, J.N. Xu, L. Miyagi, H.L. Dong, H.W. Sheng, Y.J. Wang, Q. Li, Y.M. Ma, H.Z. Zhang, J.Y. Yan, N. Tamura, M. Kunz, K. Lutker, T.L. Huang, D.A. Hughes, X. Huang, B. Chen

High-pressure strengthening in ultrafine-grained metals

Nature, 579(7797)(2020), 67-72.

N. Zhou, K.I. Elkhodary, X. Huang, S. Tang, Y. Li

Dislocation structure and dynamics govern pop-in modes of nanoindentation on single-crystal metals

Philosophical Magazine, 100(12)(2020), 1585-1606.

G.L. Wu, W.Q. Zhu, Q.Y. He, Z.Q. Feng, T.L. Huang, L. Zhang, S. Schmidt, A. Godfrey, X. Huang

2D and 3D orientation mapping in nanostructured metals: A review

Nano Materials Science, 2(1)(2020), 50-57.

L.F. Shuai, T.L. Huang, G.L. Wu, G. Winther, X. Huang, O.V. Mishin

Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al-0.3%Cu

Materials Characterization, 162(2020), 110173.

X. Luo, Z.Q. Feng, T.B. Yu, J.G. Luo, T.L. Huang, G.L. Wu, N. Hansen, X. Huang

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Acta Materialia, 183(2020), 398-407.

X. Luo, Z.Q. Feng, T.B. Yu, T.L. Huang, R.G. Li, G.L. Wu, N. Hansen, X. Huang

Microstructural evolution in Mg-3Gd during accumulative roll-bonding

Materials Science and Engineering: A, 772(2020), 138763.

X. Luo, Z.Q. Feng, R. Fu, T.L. Huang, G.L. Wu, X. Huang

The synergy of boundary engineering and segregation strategy towards high strength and ductility Mg-3Gd alloy

Journal of Alloys and Compounds, 819(2020), 153051.

K.L. Li, G.Q. Ma, L. Xing, Y.F. Wang, C.F. Yu, J.H. Chen, J. Ma, G.L. Wu, W. Liu, Z.J. Shen, X. Huang

Crack suppression via in-situ oxidation in additively manufactured W-Ta alloy

Materials Letters, 263(2020), 127212.

X.J. Jiang, S. Gao, L. Zhang, G.L. Wu, X. Huang, N. Tsuji

Heterogeneity and homogeneity in 2/4 N multilayered Al fabricated by accumulative roll bonding and annealing

Journal of Materials Engineering and Performance, 29(9)(2020), 6147-6154.

X.J. Jiang, Y. Bai, L. Zhang, G.L. Wu, S. Gao, X. Huang, N. Tsuji

Termination of local strain concentration led to better tensile ductility in multilayered 2N/4N Al sheet

Materials Science and Engineering: A, 782(2020), 139240.

X. Huang

Editorial for a special issue on nanostructured metals and alloys

Nano Materials Science, 2(1)(2020), 1-2.

Z.Q. Feng, X. Luo, Y.X. Chen, N. Chen, L. Zhang, G.L. Wu, X. Huang

Effects of precipitates versus solute atoms on the deformation-induced grain refinement in an Al-Cu-Mg alloy

Materials Science and Engineering: A, 771(2020), 138486.

Z.Q. Feng, R. Fu, C.W. Lin, G.L. Wu, T.L. Huang, L. Zhang, X. Huang

TEM-based dislocation tomography: Challenges and opportunities

Current Opinion in Solid State & Materials Science, 24(3)(2020), 100833.

Y. Cheng, Y.J. Fu, Y.C. Xin, G. Chen, P.D. Wu, X. Huang, Q. Liu

{10-12} twinning behavior under biaxial tension of Mg-3Al-1Zn plate

International Journal of Plasticity, 132(2020), 102754.

2019

N. Zhou, G. Zhang, T.F. Guo, X. Guo, S. Tang, X. Huang

Twin nucleation at prismatic/basal boundary in hexagonal close-packed metals

Philosophical Magazine, 99(20)(2019), 2584-2603.

L. Zhang, Y. Shibuta, C. Lu, X. Huang

Interaction between nano-voids and migrating grain boundary by molecular dynamics simulation

Acta Materialia, 173(2019), 206-224.

L. Zhang, Y. Shibuta, X. Huang, C. Lu, M. Liu

Grain boundary induced deformation mechanisms in nanocrystalline Al by molecular dynamics simulation: From interatomic potential perspective

Computational Materials Science, 156(2019), 421-433.

H.W. Zhang, Y.H. Wang, Y. Peng, P.W. Zhu, J.H. Liu, Z.Q. Feng, G.L. Wu, X. Huang

Unprecedented strength in pure iron via high-pressure induced nanotwinned martensite

Materials Research Letters, 7(9)(2019), 354-360.

S. Yoshida, T. Ikeuchi, Y. Bai, A. Shibata, N. Hansen, X. Huang, N. Tsuji

Deformation microstructures and strength of face-centered cubic high/medium entropy alloys

Materials Science and Engineering, 580(2019), 012053.

R. Yang, G.L. Wu, X.D. Zhang, W.T. Fu, N. Hansen, X. Huang

Gradient microstructure in a gear steel produced by pressurized gas nitriding

Materials, 12(22)(2019), 3797.

L. Xie, C.P. Wang, Y.H. Wang, G.L. Wu, X. Huang

Grain size effect on the mechanical behavior of metastable Fe-23Cr-8.5Ni alloy

Metals, 9(7)(2019), 734.

Y.H. Wang, J.M. Kang, X.M. Chen, T. Yu, N. Hansen, X. Huang

Simultaneous enhancement of strength and ductility in a fine-grained Fe-30Mn-0.11C steel at 77 K

Materials Science and Engineering, 580(2019), 012050.

L.F. Shuai, T.L. Huang, G.L. Wu, N. Hansen, X. Huang, T. Yu

Recovery kinetics in Al-0.3%Cu after heavy rolling

Materials Science and Engineering, 580(2019), 012044.

X. Luo, J.Q. Luo, Z.Q. Feng, F.P. Hu, T. Yu, C. Berggreen, G.L. Wu, N. Hansen, X. Huang

Grain size effect on deformation mechanisms in Mg-3Gd

Materials Science and Engineering, 580(2019), 012040.

X.J. Jiang, L.J. Zhang, L. Zhang, T.L. Huang, G.L. Wu, X. Huang, O.V. Mishin

Heterogeneous microstructure and enhanced mechanical properties in annealed multilayered IF steel

Materials Science and Engineering: A, 759(2019), 262-271.

F.P. Hu, T.B. Yu, W.T. Liu, Y. Yang, G.B. Wei, X. Luo, H.Y. Tang, N. Hansen, X. Huang, W.D. Xie

Pt-20Rh dispersion strengthened by ZrO2 - Microstructure and strength

Materials Science and Engineering: A, 765(2019), 138305.

F.P. Hu, Z.Y. Wang, T.B. Yu, Z.L. Yang, G.B. Wei, X. Luo, N. Hansen, X. Huang, W.D. Xie

Microstructure and strength of weldment in Pt20Rh alloys dispersion-strengthened by ZrO2 particles

Materials Science and Engineering, 580(2019), 012035.

B. Guan, Y.C. Xin, X. Huang, P.D. Wu, Q. Liu

Quantitative prediction of texture effect on Hall-Fetch slope for magnesium alloys

Acta Materialia, 173(2019), 142-152.

X.X. Fu, K. Wu, V. Serin, B. Warot-Fonrose, Q.Y. He, R. Yang, L. Zhang, X. Huang

Electron energy-loss magnetic chiral dichroism of magnetic iron film affected by an underlayer in a double-layer structure

Applied Physics Letters, 115(11)(2019), 112401.

N. Chen, G.Q. Ma, W.Q. Zhu, A. Godfrey, Z.J. Shen, G.L. Wu, X. Huang

Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment

Materials Science and Engineering: A, 759(2019), 65-69.

2018

X.D. Zhang, N. Hansen, A. Godfrey, X. Huang

Structure and strength of sub-100 nm lamellar structures in cold-drawn pearlitic steel wire

Materials Science and Technology, 34(7) (2018), 794-808.

L. Zhang, Y. Shibuta, C. Lu, X. Huang

Atomistic simulation of the interaction between point defects and twin boundary

Physica Status Solidi B-Basic Solid State Physics, 255(9)(2018), 1800228.

L. Xie, T.L. Huang, L. Zhang, W.Q. Cao, G.L. Wu, X. Huang

Managing both strength and ductility in duplex stainless steel with heterogeneous lamella structure

Materials Science and Engineering: A, 738(2018), 190-193

Y.H. Wang, J.M. Kang, Y. Peng, T.S. Wang, N. Hansen, X. Huang

Laminated Fe-34.5 Mn-0.04C composite with high strength and ductility

Journal of Materials Science & Technology, 34(10)(2018), 1939-1943.

Y.H. Wang, J.M. Kang, Y. Peng, T.S. Wang, N. Hansen, X. Huang

Hall-Petch strengthening in Fe-34.5Mn-0.04C steel cold-rolled partially recrystallized and fully recrystallized

Scripta Materialia, 155(2018), 41-45.

L.F. Shuai, T.L. Huang, G.L. Wu, X. Huang, O.V. Mishin

Development of Goss texture in Al-0.3% Cu annealed after heavy rolling

Journal of Alloys and Compounds, 749(2018), 399-405.

T.L. Huang, L.F. Shuai, A. Wakeel, G.L. Wu, N. Hansen, X. Huang

Strengthening mechanisms and Hall-Petch stress of ultrafine grained Al-0.3%Cu

Acta Materialia, 156(2018), 369-378.

Q.Y. He, W.Q. Zhu, X.X. Fu, L. Zhang, G.L. Wu, X. Huang

Simultaneous enhancement of mechanical and magnetic properties in extremely-fine nanograined Ni-P alloys

Nanomaterials, 8(10)(2018), 792.

Q.Y. He, T.L. Huang, L.F. Shuai, Y.B. Zhang, G.L. Wu, X. Huang, D. Juul Jensen

In-situ investigation of the evolution of annealing twins in high purity aluminium

Scripta Materialia 153(2018), 68-72.

B. Gao, Q. Xiang, T.F. Guo, X. Guod, S. Tang, X. Huang

In situ TEM investigation on void coalescence in metallic materials

Materials Science and Engineering: A, 734(2018), 260-268.

2017

B.G. Yuan, Y.Y. Jin, C.S. Hong, X.X. Zhang, X. Huang

Hydrogen-induced room-temperature plasticity in TC4 and TC21 alloys

IOP Conference Series: Materials Science and Engineering, 219(2017), 012049.

T. Yu, C. Hong, K. Kitamura, K. Tomatsu, A. Taniyama, X. Huang, N. Hansen

A gradient surface produced by combined electroplating and incremental frictional sliding

IOP Conference Series: Materials Science and Engineering, 219(2017), 012048.

H.H. Yu, C.Z. Li, Y.C. Xin, A. Chapuis, X. Huang, Q. Liu

The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys

Acta Materialia, 128(2017), 313-326.

R. Yang, X. Zhang, D. Mallipeddi, N. Angelou, H.L. Toftegaard, Y. Li, J. Ahlstrom, L. Lorentzen, G.L. Wu, X. Huang

Effect of shot peening on the residual stress and mechanical behaviour of low-temperature and high-temperature annealed martensitic gear steel 18CrNiMo7-6

IOP Conference Series: Materials Science and Engineering, 219(2017), 012046.

R. Yang, G.L. Wu, X. Zhang, W.T. Fu, X. Huang

Gradient microstructure and microhardness in a nitrided 18CrNiMo7-6 gear steel

IOP Conference Series: Materials Science and Engineering, 219(2017), 012047.

L. Xie, T.L. Huang, Y.H. Wang, L. Zhang, G.L. Wu, N. Tsuji, X. Huang

Structural refinement and property optimization in an Fe-23Cr-8.5Ni duplex stainless steel

IOP Conference Series: Materials Science and Engineering, 219(2017), 012045.

L. Xie, T.L. Huang, Y.H. Wang, G.L. Wu, N. Tsuji, X. Huang

Deformation induced martensitic transformation and its initial microstructure dependence in a high alloyed duplex stainless steel

Steel Research International, 88(12)(2017), 1700169.

Y.H. Wang, J.M. Kang, Y. Peng, H.W. Zhang, T.S. Wang, X. Huang

Observation of simultaneous increase in strength and ductility by grain refinement in a Fe-34.5Mn-0.04C steel

IOP Conference Series: Materials Science and Engineering, 219(2017), 012043.

S. Tang, G. Zhang, N. Zhou, T.F. Guo, X. Huang

Uniaxial stress-driven grain boundary migration in Hexagonal Close-packed (HCP) metals: Theory and MD simulations

International Journal of Plasticity, 95(2017), 82-104.

L.F. Shuai, T.L. Huang, G.L. Wu, N. Hansen, X. Huang

Characterization of Cu distribution in an Al-0.3%Cu alloy cold rolled to 98%

IOP Conference Series: Materials Science and Engineering, 219(2017), 012038.

Z. Lv, X. Zhang, X. Huang, N. Hansen

EBSD characterization of deformed lath martensite in IF steel

IOP Conference Series: Materials Science and Engineering, 219 (2017), 012033.

Q.H. Lu, Z.S. You, X. Huang, N. Hansen, L. Lu

Dependence of dislocation structure on orientation and slip systems in highly oriented nanotwinned Cu

Acta Materialia, 127(2017), 85-97.

Q.H. Lu, X. Huang, N. Hansen, L. Lu

Orientation and length scale effects on dislocation structure in highly oriented nanotwinned Cu

IOP Conference Series: Materials Science and Engineering, 219(2017), 012032.

C.S. Hong, S. Faester, N. Hansen, X. Huang, R.I. Barabash

Characterization of voids in shock-loaded Al single crystal by combining X-ray tomography and electron microscopy

IOP Conference Series: Materials Science and Engineering, 219(2017), 012027.

C. Hong, S. Faester, N. Hansen, X. Huang, R.I. Barabash

Non-spherical voids and lattice reorientation patterning in a shock-loaded Al single crystal

Acta Materialia, 134(2017), 16-30.

Q.Y. He, M. Zhu, Q.S. Mei, C.S. Hong, G.L. Wu, X. Huang

Microstructural and hardness gradients in Cu processed by high pressure surface rolling

IOP Conference Series: Materials Science and Engineering, 219(2017), 012025.

Z.Q. Feng, C.W. Lin, T.T. Li, X. Luo, G.L. Wu, X. Huang

Electron tomography of dislocations in an Al-Cu-Mg alloy

IOP Conference Series: Materials Science and Engineering, 219(2017), 012018.

2016

X.H. Zheng, H.W. Zhang, X. Huang, N. Hansen, K. Lu

Influence of strain rate on the orientation dependence of microstructure in nickel single crystals

Philosophical Magazine Letters, 96(2)(2016), 52-59.

X.D. Zhang, N. Hansen, A. Godfrey, X. Huang

Dislocation-based plasticity and strengthening mechanisms in sub 20 nm lamellar structures in pearlitic steel wire

Acta Materialia, 114(2016), 176-183.

H.H. Yu, Y.C. Xin, A. Chapuis, X. Huang, R.L. Xin, Q. Liu

The different effects of twin boundary and grain boundary on reducing tension-compression yield asymmetry of Mg alloys

Scientific Reports, 6(2016), 29283.

Y. Du, G.H. Fan, T.B. Yu, N. Hansen, L. Geng, X. Huang

Laminated Ti-Al composites: Processing, structure and strength

Materials Science and Engineering: A, 673(2016), 572-580.

2015

T.B. Yu, D.A. Hughes, N. Hansen, X. Huang

In situ observation of triple junction motion during recovery of heavily deformed aluminum

Acta Materialia, 86 (2015), 269-278.

T. Yu, N. Hansen, X. Huang

Recovery by triple junction motion in heavily deformed metals

IOP Conference Series: Materials Science and Engineering, 89(2015).

X.L. Wu, M.X. Yang, F.P. Yuan, G.L. Wu, Y.J. Wei, X. Huang, Y.T. Zhu

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

Proceedings of the National Academy of Sciences of the United States of America, 112(47)(2015), 14501-14505.

J.Q. Wu, S. Huang, Y.H. Wang, G.L. Wu, N. Hansen, X. Huang

Microstructure and mechanical properties of ARB processed Mg-3%Gd alloy

IOP Conference Series: Materials Science and Engineering, 89(2015), 012052.

G. Winther, C.S. Hong, X. Huang

Low-Energy Dislocation Structure (LEDS) character of dislocation boundaries aligned with slip planes in rolled aluminium

Philosophical Magazine, 95(13)(2015), 1471-1489.

B. Wang, Z.Q. Lv, Z.A. Zhou, S.H. Sun, X. Huang, W.T. Fu

Combined effect of rapid nitriding and plastic deformation on the Surface strength, toughness and wear resistance of steel 38CrMoAlA

IOP Conference Series: Materials Science and Engineering, 89(2015),

012046.

A. Wakeel, T.L. Huang, G.L. Wu, V. Mishin, X. Huang

Development of a strong Goss texture during annealing of a heavily rolled Al-0.3% Cu alloy

17th International Conference on Textures of Materials, (2015).

S. Tang, Y. Yang, X.H. Peng, W.K. Liu, X. Huang, K. Elkhodary

A semi-numerical algorithm for instability of compressible multilayered structures

Computational Mechanics, 56(1)(2015), 63-75.

X.R. Li, C.L. Xu, T.L. Huang, Y. Luo, G.L. Wu, Q. Liu, X. Huang

Effects of thermomechanical processing on the recrystallization texture and grain size of Al-1% Si sputtering target material

IOP Conference Series: Materials Science and Engineering, 82(2015), 012065.

X.R. Li, A. Wakeel, T.L. Huang, G.L. Wu, X. Huang

Recrystallization textures and microstructures of Al-0.3% Cu alloy after deformation to high strains

IOP Conference Series: Materials Science and Engineering, 89(2015), 012032.

T.L. Huang, G.L. Wu, X. Huang, N. Hansen

Characterization of Si particles and their effects on and recrystallization in a nanostructured cold rolled Al-1%Si alloy

IOP Conference Series: Materials Science and Engineering, 89(2015), 012028.

C.S. Hong, X. Huang, N. Hansen

Gradient nanostructured surface of a Cu plate processed by incremental frictional sliding

IOP Conference Series: Materials Science and Engineering, 89(2015), 012026.

Y. Du, G.H. Fan, T. Yu, N. Hansen, L. Geng, X. Huang

Effects of interface roughness on the annealing behaviour of laminated Ti-Al composite deformed by hot rolling

IOP Conference Series: Materials Science and Engineering, 89(2015), 012021.

2014

X.D. Zhang, X. Huang, N. Hansen

Dislocation boundary formation and effect of high angle boundaries in nano copper crystals during in-situ TEM deformation

17th US National Congress on Theoretical and Applied Mechanics, (2014).

X.D. Zhang, N. Hansen, A. Godfrey, X. Huang

Hirarchical structures and strength in cold-drawn pearlitic steel wire

Proceedings of the 35th Risø International Symposium on Materials Science: Nanostructured Metals: New Frontiers of Nanometals, (2014), 1-5.

T.B. Yu, N. Hansen, X. Huang, A. Godfrey

Observation of a new mechanism balancing hardening and softening in metals

Materials Research Letters, 2(3) (2014), 160-165.

T.B. Yu, N. Hansen, X. Huang, A. Godfrey

Observation of a new dynamic recovery mechanism in the high strain regime

Proceedings of the Risø International Symposium on Materials Science, 35(2014), 493-500.

R.L. Xin, M.Y. Wang, X. Huang, C.F. Guo, Q. Liu

Observation and Schmid factor analysis of multiple twins in a warm-rolled Mg-3Al-1Zn alloy

Materials Science and Engineering: A, 596(2014), 41-44.

R.L. Xin, C.F. Guo, Z.R. Xu, G.D. Liu, X. Huang, Q. Liu

Characteristics of long {10-12} twin bands in sheet rolling of a magnesium alloy

Scripta Materialia, 74(2014), 96-99.

G. Winther, X. Huang, C.S. Hong

Comparison of experimental and predicted dislocation networks in deformation-induced dislocation boundaries aligned with slip planes in aluminium

Proceedings of the 35th Risø International Symposium on Material Science:New Frontiers of Nanometals, (2014), 479-484.

Y.H. Wang, Y. Peng, Y.M. He, T.S. Wang, X. Huang

Effect of temperature on the tensile behavior of a fine-grained high manganese austenitic steel

Proceedings of the Risø International Symposium on Materials Science,35(2014), 471-477.

A. Wakeel, T.L. Huang, G.L. Wu, T.B. Yu, N. Hansen, X. Huang

Structure and mechanical properties of nanostructured Al-0.3%Cu alloy

Proceedings of the Risø International Symposium on Materials Science,35(2014), 463-469.

S. Tang, Y. Li, W.K. Liu, X. Huang

Surface ripples of polymeric nanofibers under tension: The crucial role of Poisson’s ratio

Macromolecules, 47(18)(2014), 6503-6514.

Q.H. Lu, M.L. Sui, X. Huang, D.X. Li, N. Hansen

Length scale effect on the deformation microstructures of grown-in twins in copper

Philosophical Magazine, 94(20)(2014), 2262-2280.

X. Huang

Size effects on the strength of metals

Acta Metallurgica Sinica, 50(2)(2014), 137-140.

X. Huang, A. Godfrey, N. Hansen

Orientation versus size effect on dislocation structures

Proceedings of the Risø International Symposium on Materials Science, 35(2014), 45-58.

T.L. Huang, G.L. Wu, Q. Liu, X. Huang

Effect of second phase particles on the tensile instability of a nanostructured Al1%Si Alloy

Materials Science Forum, 783-786(2014), 2629-2634.

T.L. Huang, C. Li, G.L. Wu, T.B. Yu, Q. Liu, N. Hansen, X. Huang

Particle stabilization of plastic flow in nanostructured Al-1 %Si Alloy

Journal of Materials Science, 49(19)(2014), 6667-6673.

T. Huang, F. Jiang, C. Li, Q. Liu, N. Hansen, X. Huang

Effect of strain rate on the tensile behaviour of a nanostructured Al-1%Si alloy

Proceedings of the Risø International Symposium on Materials Science, 35(2014), 331-337.

C. Hong, N. Tao, Y. Zhang, X. Huang, K. Lu

Analysis of strength and ductility of partially recrystallized Cu-4.5 wt.% Al Proceedings of the Risø International Symposium on Materials Science, 35(2014), 321-329.

N. Hansen, X.D. Zhang, X. Huang

Microstructure and plasticity from nanoscale to macroscale

Plasticity, (2014).

N. Hansen, X.D. Zhang, X. Huang

Layered structures in deformed metals and alloys

TMS 2014: 143rd Annual Meeting and Exhibition, (2014).

Q.Y. Dong, T.L. Huang, G.L. Wu, X. Huang

Enhanced temperature dependence of work hardening in an ultra-fine grained brass

Proceedings of the Risø International Symposium on Materials Science, 35 (2014), 259-265.

S.Q. Deng, A. Godfrey, O. Mishin, N. Hansen, X. Huang

Microstructural evolution and strength of copper during cold rolling to large strain

Proceedings of the Risø International Symposium on Materials Science, 35(2014), 251-258.

2013

X.D. Zhang, A. Godfrey, N. Hansen, X. Huang

Hierarchical structures in cold-drawn pearlitic steel wire

Acta Materialia, 61(13)(2013), 4898-4909.

X.D. Zhang, X. Huang, N. Hansen

Flow stabilization in submicron-sized copper crystals by introducing high angle boundaries

Materials Science & Technology, (2013), 49.

X. Zhang, N. Hansen, Y.K. Gao, X. Huang

Structure and strength in graded nanostructured steel

Thermec 2013-International Conference on Processing & Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Application, (2013), 222.

X. Zhang, N. Hansen, Y. Gao, X. Huang

Microstructure and strength of graded structures produced by shot peening

2nd Summer School and Symposium on Nanometals, (2013), 4.

T.B. Yu, N. Hansen, X. Huang

Triple junction motion - a new recovery mechanism in metals deformed to large strains

Materials Science Forum, 753(2013), 485-488.

T.B. Yu, N. Hansen, X. Huang

Linking recovery and recrystallization through triple junction motion in aluminum cold rolled to a large strain

Acta Materialia, 61(17)(2013), 6577-6586.

H.Y. Xu, Y.B. Zhang, Y. Yuan, B.Q. Fu, A. Godfrey, G. De Temmerman, W. Liu, X. Huang

Observations of orientation dependence of surface morphology in tungsten implanted by low energy and high flux D plasma

Journal of Nuclear Materials, 443(1-3)(2013), 452-457.

G.M. Le, A. Godfrey, N. Hansen, W. Liu, G. Winther, X. Huang

Influence of grain size in the near-micrometre regime on the deformation microstructure in aluminium

Acta Materialia, 61(19)(2013), 7072-7086.

C.S. Hong, X. Huang, G. Winther

Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium

Philosophical Magazine, 93(23)(2013), 3118-3141.

N. Hansen, X. Zhang, X. Huang, A. Godfrey

Superstærk ståltråd med mikrostruktur på nanoskala, (2013).

N. Hansen, X. Zhang, X. Huang, Y. Gao

Nanostruktur og styrke af stål deformeret ved valsning og med shot peening

Dansk Metallurgisk Selskabs vintermøde, (2013).

N. Hansen, X.D. Zhang, X. Huang

Plastic deformation of metal surfaces

Advanced Materials and Reservoir Engineering for Extreme Oil & Gas Environments: Nanocrystalline Metals I: 2013 TMS Annual Meeting & Exhibition, (2013).

N. Hansen, X.D. Zhang, X. Huang

Nanostructures and strength of deformed steel produced by shot peening and by cold rolling

International Symposium on Plasticity 2013 and Its Current Applications, (2013).

N. Hansen, X.D. Zhang, X. Huang

Effect of scale on structure and strength of layered nanostructures in deformed metals

Nanoscale Multilayers 2013: An International Workshop on the Mechanical Behavior of Nanoscale Multilayers, (2013), 18.

N. Hansen, T.B. Yu, O.V. Mishin, X. Huang

Coupling of local texture and microstructure evolution during restoration processes in aluminum deformed to large strains

Materials Science Forum, 753 (2013), 251-256.

Y.L. Chen, T.L. Huang, X. Gong, G.L. Wu, Q. Liu, X. Huang

Formation of a random recrystallization texture in heavily cold rolled and annealed Al-1%Si alloy

Materials Science Forum, 753(2013), 243-246.

2012

X.D. Zhang, N. Hansen, Y.K. Gao, X. Huang

Hall-Petch and dislocation strengthening in graded nanostructured steel

Acta Materialia, 60(16)(2012), 5933-5943.

X.D. Zhang, X. Huang, N. Hansen, A. Godfrey

Microstructure, strengthening mechanisms and strength-structure relationships in cold-drawn pearlitic steel wire

11th International Conference on Nanostructured Materials, (2012).

X. Zhang, N. Hansen, A. Godfrey, X. Huang

Microstructural evolution, strengthening mechanisms and strength structure relationship in cold-drawn pearlitic steel wire

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 407-416.

X.D. Zhang, A. Godfrey, G. Winther, N. Hansen, X. Huang

Plastic deformation of submicron-sized crystals studied by in-situ Kikuchi diffraction and dislocation imaging

Materials Characterization, 70 (2012), 21-27.

X.D Zhang, A. Godfrey, X. Huang, N. Hansen

Structural parameters and strengthening mechanisms in cold-drawn pearlitic steel wires

141st TMS Annual Meeting & Exhibition: Ultrafine Grained Materials 7 Young Scientist, (2012).

H.W. Zhang, K. Lu, R. Pippan, X. Huang, N. Hansen

Strong and stable nanostructured Ni by light alloying

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 399-406.

T.B. Yu, N. Hansen, X. Huang

Recovery mechanisms in nanostructured aluminium

Philosophical Magazine, 92(33)(2012), 4056-4074.

T.B. Yu, N. Hansen, X. Huang

Low temperature recovery mechanisms in nanostructured commercial purity aluminum

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 391-397.

G. Winther, X. Huang, C.S. Hong

Possible dislocation configurations in slip-plane-aligned boundaries in fcc metals

4th International Conference on Fundamental Properties of Dislocations, (2012).

H.L. Toftegaard, X. Huang, J. Holm, N. Hansen

Ballistic performance of micro- and nanostructured aluminium sheets

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 355-364.

S.N. Mathaudhu, X. Huang, H.S. Kim, T.G. Langdon, T.C. Lowe, R.Z. Valiev, X.L. Wu, M. Zehetbauer, Y.T.T. Zhu

Preface to the special issue on ultrafine-grained materials

Journal of Materials Science, 47(22)(2012), 7717-7718.

G.M. Le, A. Godfrey, G. Winther, N. Hansen, X. Huang

Length scale effects on deformation microstructure formation in the near-micrometre grain size regime

33rd Risø International Symposium on Materials Science: Nanometals-Status and Perspective, (2012), 63-78.

G.M. Le, A. Godfrey, C.S. Hong, X. Huang, G. Winther

Orientation dependence of the deformation microstructure in compressed aluminum

Scripta Materialia, 66(6)(2012), 359-362.

J. Kidmose, L. Lu, G. Winther, N. Hansen, X. Huang

Strain distribution during tensile deformation of nanostructured aluminum samples

Journal of Materials Science, 47(22)(2012), 7901-7907.

J. Kidmose, L. Lu, N. Hansen, G. Winther, X. Huang

Onset of strain localisation in nanostructured aluminium

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 265-270.

D. Juul Jensen, A. Godfrey, X. Huang, X.D. Zhang, Y.B. Zhang

Characterization of nanometals

Proceedings of the the 15th European Microscopy Congress, (2012).

X. Huang, G. Winther

Grain orientation, slip system and dislocation microstructures

4th International Conference on Fundamental Properties of Dislocations, (2012).

X. Huang, S. Morito, N. Hansen, T. Maki

Ultrafine structure and high strength in cold-rolled martensite

Metallurgical and Materials Transactions A, (10)(2012), 3517-3531.

X. Huang, N. Hansen

Effects of post-process annealing and deformation on the structure and properties of nanostructured metals produced by plastic deformation

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 49-61.

T.L. Huang, Q.S. Dong, X. Gong, N. Hansen, Q. Liu, X. Huang

Cold rolled nanostructured super-pure Al (99.9996%) containing 1% Si particles: structure and strength

Journal of Material Science, 47(22)(2012), 7914-7920.

T.L. Huang, Q.S. Dong, X. Gong, Q. Liu, N. Hansen, X. Huang

Effect of second phase particles on the deformation structure and mechanical behaviour of nanostructured aluminium

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 249-256.

C. Hong, X. Huang, G. Winther

Experimental characterization of dislocations in deformation induced planar boundaries of rolled aluminium

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 239-248.

C. Hong, X. Huang, G. Winther

Characterization of dislocations in deformation-induced planar boundaries of aluminium

4th International Conference on Fundamental Properties of Dislocations, (2012).

C. Hong, X. Huang, C. Shute, A. Hodge, J.R. Weertman

Persistence of twins in highly nanotwinned copper under intense shear strain

Proceedings of the Risø International Symposium on Materials Science, 33(2012), 229-238.

A.M. Hodge, T.A. Furnish, C.J. Shute, Y. Liao, X. Huang, C.S. Hong, Y.T. Zhu, T.W. Barbee, J.R. Weertman

Twin stability in highly nanotwinned Cu under compression, torsion and tension

Scripta Materialia, 66(11)(2012), 872-877.

N. Hansen, X. Zhang, A. Godfrey, X. Huang

Microstructure, strengthening mechanisms and strength-structure relationships in cold-drawn pearlitic steel wire

Acta Materialia, 59(9)(2011), 3422-3430.

N. Hansen, X. Zhang, Y. Gao, X. Huang

Near surface nanoscale structures produced by plastic deformation

141st TMS Annual Meeting and Exhibition: Linking Science and Technology for Global Solutions, (2012).

M. Azuma, S. Goutianos, N. Hansen, G. Winther, X. Huang

Effect of hardness of martensite and ferrite on void formation in dual phase steel

Material Science and Technology, 28(9-10)(2012), 1092-1100.

2011

X.D. Zhang, A. Godfrey, X. Huang, N. Hansen, Q. Liu

Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire

Acta Materialia, 59 (9)(2011), 3422-3430.

H.W. Zhang, K. Lu, R. Pippan, X. Huang, N. Hansen

Enhancement of strength and stability of nanostructured Ni by small amounts of solutes

Scripta Materialia. 65(6)(2011), 481-484.

H.W. Zhang, X. Huang, R. Pippan, N. Hansen, K. Lu

Enhancement of both strength and thermal stability of nanostructured Ni by small amount of foreign elements

Symposium on Nanometals for Energy, (2011).

H.W. Zhang, X. Huang, N. Hansen, R. Pippan

Microstructure of pure Ni subjected to high pressure torsion

Materials Science Forum, 667(2011), 529-534.

T.B. Yu, N. Hansen, X. Huang

Recovery by triple junction motion in aluminium deformed to ultrahigh strains

Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, 467(2135)(2011), 3039-3065.

Y.L. Wei, A. Godfrey, W. Liu, Q. Liu, X. Huang, N. Hansen, G. Winther

Dislocations, boundaries and slip systems in cube grains of rolled aluminium

Scripta Materialia, 65(4)(2011), 355-358.

H.H. Liu, S. Schmidt, H.F. Poulsen, A. Godfrey, Z.Q. Liu, J.A. Sharon, X. Huang

Three-dimensional orientation mapping in the transmission electron microscope

Science, 332(6031)(2011), 833-834.

H.H. Liu, S. Schmidt, H.F. Poulsen, A. Godfrey, Z.Q. Liu, J. Sharon, X. Huang

3D grain orientation mapping in the transmission electron microscope

Symposium on Nanometals for Energy, (2011).

G. Le, A. Godfrey, X. Huang, G. Winther

Grain orientation dependence of deformation microstructures during compression of aluminium

Symposium on Nanometals for Energy, (2011).

J. Kidmose, X. Huang

Effects of post process treatments on the mechanical stability and formability of nanostructured aluminum

Symposium on Nanometals for Energy, (2011).

X. Huang, H.F. Poulsen, S. Schmidt, A. Godfrey

3D grain orientation mapping of polycrystals on scales from 1 mm to 1 nm using 3D-XRD and TEM

13th International Congress for Stereology, (2011).

C. Hong, X. Huang, G. Winther

Dislocation content of planar boundaries - relation to slip systems

Symposium on Nanometals for Energy, (2011).

N. Hansen, X. Huang, G. Winther

Effect of grain boundaries and grain orientation on structure and properties

Metallurgical Materials and Transactions A, 42A(3)(2011), 613-625.

A. Godfrey, G. Le, X. Huang, G. Winther

Effect of grain size on formation of deformation microstructures

Symposium on Nanometals for Energy, (2011).

2010

X.D. Zhang, A. Godfrey, G. Winther, N. Hansen, X. Huang

In-situ TEM compression of submicron-sized single crystal copper pillars

31st Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 31(2010), 489-496.

X.D. Zhang, A. Godfrey, N. Hansen, X. Huang, W. Liu, Q. Liu

Evolution of cementite morphology in pearlitic steel wire during wet wire drawing

Materials Characterization, 61(1)(2010), 65-72.

H.W. Zhang, X. Huang, R. Pippan, N. Hansen

Thermal behavior of nickel deformed to ultra-high strain by high pressure torsion

Materials Science Forum, 715(2010), 387-392.

H.W. Zhang, X. Huang, R. Pippan, N. Hansen

Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

Acta Materialia, 58(5)(2010), 1698-1707.

Q. Yu, Z.W. Shan, J. Li, X. Huang, L. Xiao, J. Sun, E. Ma

Strong crystal size effect on deformation twinning

Nature, 463(7279)(2010), 335-338.

A. Ramar, S. Hata, X. Huang, R.E.D. Borkowski, G. Winther

Dislocation electron tomography of boundaries in deformed aluminium

31st Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 31(2010), 397-404.

J. Oddershede, J.P. Wright, L. Margulies, X. Huang, H.F. Poulsen, S. Schmidt, G. Winther

3DXRD measurements of lattice rotations in tensile deformed IF steel

31st Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 31(2010), 369-374.

H.H. Liu, N. Pryds, J. Schou, X. Huang

Quantitative TEM analysis of Al/Cu multilayer systems prepared by pulsed laser deposition

Applied Physics A, 101(4)(2010), 677-680.

H.H. Liu, H.F. Poulsen, S. Schmidt, H.O. Sorensen, A. Godfrey, X. Huang

A new principle of orientation determination for 3D electron diffraction microscopy

31st Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 31(2010), 311-316.

J. Kidmose, D.Y. Cai, N. Hansen, G. Winther, X. Huang

Strain rate dependence of the flow stress in nanostructured aluminium sheets produced by accumulative roll bonding

31st Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 31(2010), 297-302.

N. Kamikawa, X. Huang, Y. Kondo, T. Furuhara, N. Hansen

Stored energy and annealing behavior of heavily deformed aluminium Materials Science Forum, 715(2010), 367-372.

X. Huang, N. Kamikawa, N. Hansen

Strengthening mechanisms and optimization of structure and properties in a nanostructured IF steel

Journal of Material Science, 45(17)(2010), 4761-4769.

C.S. Hong, N.R. Tao, X. Huang, K. Lu

Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu-Al alloy processed by dynamic plastic deformation

Acta Materialia, 58(8)(2010), 3103-3116.

M. Azuma, S. Goutianos, N. Hansen, G. Winther, X. Huang

In-situ observation of void formation in dual phase steel

31st Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 31(2010), 243-250.

N. Kamikawa, X. Huang, N. Hansen

Dislocation-source hardening in nanostructured steel produced by severe plastic deformation

Materials Science Forum, 638(2010), 1959-1964.

2009

X.D. Zhang, A. Godfrey, X. Huang, N. Hansen, W. Liu, Q. Liu

Characterization of the microstructure in drawn pearlitic steel wires

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 409-416.

H.W. Zhang, X. Huang, R. Pippan, N. Hansen

Thermal behavior of pure Ni deformed by high pressure torsion to ultra-high strain

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 401-408.

T. Yu, N. Hansen, X. Huang, G. Winther

Recovery kinetics of commercial purity aluminium after large strain

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 393-400.

Y.L. Wei, X. Huang, G. Winther, N. Hansen, W. Liu, Q. Liu, A. Godfrey

Cell structures in rolled aluminium and nickel

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 385-392.

Y.L. Wei, X. Huang, G. Winther, A. Godfrey, N. Hansen, W. Liu, Q. Liu

Correlation between dislocation content and slip systems in cell structures of cube grains of rolled aluminium

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 377-383.

N. Tsuji, N. Kamikawa, D. Terada, X. Huang, N. Hansen

Yield point phenomena in nanostructured pure aluminum

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 369-375.

H. Toftegaard, X. Huang, K.C. Jorgensen, J. Holm, N. Hansen

Microstructural, mechanical and ballistic characterization of nanostructured al sheets

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 359-368.

K. Sugio, H.H. Liu, H.F. Poulsen, X. Huang

Computer simulation of electron nanodiffraction patterns from overlapping grains

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 337-342.

L. Lu, X. Chen, X. Huang, K. Lu

Revealing the maximum strength in nanotwinned copper

Science, 323(5914)(2009), 607-610.

N. Kamikawa, X. Huang, N. Tsuji, N. Hansen

Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed

Acta Materialia, 57(14)(2009), 4198-4208.

N. Kamikawa, X. Huang, N. Hansen

Optimization of mechanical properties of nanostructured ultralow carbon IF steel by post-process deformation

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 223-230.

X. Huang

Preface to the viewpoint set: Nanostructured metals - Advances in processing characterization and application

Scripta Materialia, 60(12)(2009), 1031-1032.

X. Huang

Tailoring dislocation structures and mechanical properties of nanostructured metals produced by plastic deformation

Scripta Materialia, 60(12)(2009), 1078-1082.

X. Huang, N. Tsuji, W. Pantleon

Strengthening mechanisms, flow instabilities and property optimization in nanostructured metals

30th Risø International Symposium on Materials Science: Nanostructures Metals Fundamentals to Applications, 30(2009), 59-80.

C.S. Hong, N.R. Tao, K. Lu, X. Huang

Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation

Scripta Materialia, 61(3)(2009), 289-292.

2008

H.W. Zhang, X. Huang, N. Hansen, R. Pippan, M.J. Zehetbauer

Strengthening of nickel deformed by high pressure torsion

Materials Science Forum, 584(2008), 417-421.

H.W. Zhang, X. Huang, N. Hansen

Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains

Acta Materialia, 56(19)(2008), 5451-5465.

K. Sugio, X. Huang

Computer simulation of electron nanodiffraction from polycrystalline materials

14th European Microscopy Congress - Instrumentation and Methods, (2008), 227-228.

N. Kamikawa, X. Huang, G. Winther, N. Tsuji, N. Hansen

Reversible texture transition during accumulative roll bonding

15th International Conference on Textures of Materials: Applications of Texture Analysis, 15(2008), 669-680.

N. Kamikawa, X. Huang, N. Hansen

Tailoring structures through two-step annealing process in nanostructured aluminum produced by accumulative roll-bonding

Journal of Material Science, 43(23-24)(2008), 7313-7319.

X. Huang, N. Kamikawa, N. Tsuji, N. Hansen

Nanostructured aluminum and IF steel produced by rolling - a comparative study

ISIJ International, 48(8)(2008), 1080-1087.

X. Huang, N. Kamikawa, N. Hansen

Increasing the ductility of nanostructured Al and Fe by deformation

Material Science and Engineering A, 493(1-2)(2008), 184-189.

X. Huang, N. Kamikawa, N. Hansen

Property optimization of nanostructured ARB-processed Al by post-process deformation

Journal of Material Science, 43(23-24)(2008), 7397-7402.

X. Huang, N. Kamikawa, N. Hansen

Strengthening mechanisms in nanostructured aluminum

Material Science and Engineering A, 483(84)(2008), 102-104.

N. Hansen, X. Huang, N. Kamikawa

Structure and strength of IF steel after large strain deformation

International Conference on Microstructure and texture in Steels and Other Materials: Microstructure and Texture in Steels and Other Materials, (2008), 33-42.

N. Hansen, X. Huang, G. Winther

Grain orientation, deformation microstructure and flow stress

Material Science and Engineering A, 494(1-2)(2008), 61-67.

N. Hansen, X. Huang, M.G. Moller, A. Godfrey

Thermal stability of aluminum cold rolled to large strain

Journal of Material Science, 43(18)(2008), 6254-6259.

2007

G. Winther, X. Huang

Dislocation structures. Part II. Slip system dependence

Philosophical Magazine, 87(33)(2007), 5215-5235.

J.A. Wert, X. Huang, G. Winther, W. Pantleon, H.F. Poulsen

Revealing deformation microstructures

Materials Today, 10(9)(2007), 24-32.

N. Kamikawa, N. Tsuji, X. Huang, N. Hansen

Through-thickness characterization of microstructure and texture in high purity aluminum processed to high strain by accumulative roll-bonding

Materials Transactions, 48(8)(2007), 1978-1985.

B. Jakobsen, H.F. Poulsen, U. Lienert, X. Huang, W. Pantleon

Investigation of the deformation structure in an aluminium magnesium alloy by high angular resolution three-dimensional X-ray diffraction

Scripta Materialia, 56(9)(2007), 769-772.

X. Huang

Characterization of nanostructured metals produced by plastic deformation

Journal of Material Science, 42(5)(2007), 1577-1583.

X. Huang, G. Winther

Dislocation structures. Part I. Grain orientation dependence

Philosophical Magazine, 87(33)(2007), 5189-5214.

N. Hansen, X. Huang, A. Godfrey

Nanostructured aluminium - recovery and recrystallization

Materials Science Forum, 558(2007), 201-206.

2006

Q. Xing, X. Huang, N. Hansen

Recovery of heavily cold-rolled aluminum: Effect of local texture

Metallurgical Materials and Transactions A, 37A(4)(2006), 1311-1322.

S. Morito, H. Yoshida, T. Maki, X. Huang

Effect of block size on the strength of lath martensite in low carbon steels

Material Science and Engineering A, 438(2006), 237-240.

S. Morito, X. Huang, T. Furuhara, T. Maki, N. Hansen

The morphology and crystallography of lath martensite in alloy steels

Acta Materialia, 54(19)(2006), 5323-5331.

N. Kamikawa, N. Tsuji, X. Huang, N. Hansen

Quantification of annealed microstructures in ARB processed aluminum

Acta Materialia, 54(11)(2006), 3055-3066.

N. Kamikawa, X. Huang, N. Tsuji, N. Hansen, Y. Minamino

EBSD and TEM characterization of ultrafine grained high purity aluminum produced by accumulative roll-bonding

Materials Science Forum, 512(2006), 91-96.

X. Huang, N. Hansen, N. Tsuji

Hardening by annealing and softening by deformation in nanostructured metals

Science, 312(5771)(2006), 249-251.

X. Huang, Q. Xing, D. Juul Jensen, N. Hansen

Large strain deformation and annealing of aluminium

Materials Science Forum, 519(2006), 79-84.

X. Huang, Q.H. Lu, M.L. Sui, D.X. Li, N. Hansen

Structural change during cold rolling of electrodeposited copper

Materials Science Forum, 539(2006), 5013-5018.

X. Huang, N. Kamikawa, N. Tsuji, N. Hansen

Correlation between texture and structure in high purity Al processed by ARB

The Minerals, Metals & Materials Society Annual Meeting, (2006), 307-314.

N. Hansen, X. Huang, W. Pantleon, G. Winther

Grain orientation and dislocation patterns

Philosophical Magazine, 86(25-26)(2006), 3981-3994.

2005

J.A. Wert, K. Kashihara, T. Okada, X. Huang, F. Inoko

Deformation band evolution in [110] Al single crystals strained in tension

Philosophical Magazine, 85(18)(2005), 1989-2006.

A. W. Larsen, H.F. Poulsen, L. Margulies, C. Gundlach, Q.F. Xing, X. Huang, D. Juul Jensen

Nucleation of recrystallization observed in situ in the bulk of a deformed metal

Scripta Materialia, 53(5)(2005), 553-557.

X. Huang

Extended dislocation boundaries in metals subjected to plane strain deformation

Material Science and Engineering A, 409(1-2)(2005), 52-58.

X. Huang

Precise determination of extended dislocation boundary plane in transmission electron microscopy

Material Science and Technology, 21(12)(2005), 1379-1382.

Y. He, X. Huang, N. Hansen, G. Winther

Effect of grain orientation on microstructures of aluminium in warm tension

Material Science and Technology, 21(12)(2005), 1471-1475.

N. Hansen, X. Huang

Structural refinement of interstitial free (IF) steel by deformation and phase transformation

Materials Science Forum, 475(2005), 37-42.

2004

N. Hansen, X. Huang, Q. Xing

Structural refinement and coarsening in deformed metals

Solid State Phenomena, 101(2004), 279-286.

Q. Xing, X. Huang, N. Hansen

Microstructural coarsening during annealing of cold rolled aluminum

Materials Science Forum, 467(2004), 209-214.

G. Winther, X. Huang, A. Godfrey, N. Hansen

Critical comparison of dislocation boundary alignment studied by TEM and EBSD: technical issues and theoretical consequences

Acta Materialia, 52(15)(2004), 4437-4446.

O. Tsuji, X. Huang, H. Nakashima

Microstructure of metals and alloys deformed to ultrahigh strains

25th Risø International Symposium on Materials Science: Evolution of Deformation Microstructures in 3D, 25(2004), 147-170.

S. Schmidt, S.F. Nielsen, C. Gundlach, L. Margulies, X. Huang, D. Juul Jensen

Watching the growth of bulk grains during recrystallization of deformed metals

Science, 305(5681)(2004), 229-232.

S. Schmidt, X. Huang, D. Juul Jensen

In-situ measurements of growth of nuclei within the bulk of deformed aluminum single crystals

Materials Science Forum, 467(2004), 189-192.

X. Huang, W.Y. Yang, Z.Q. Sun

Enhanced ductility in coarse grained Fe3Al alloys

Intermetallics, 12(7-9)(2004), 1019-1023.

X. Huang, A. Vorhauer, G. Winther, N. Hansen, R. Pippan, M. Zehetbauer

Evolution of microstructural morphology and boundary spacing during high pressure torsion of nickel

133rd Annual Meeting & Exhibition of the Minerals, Metals & Materials Society, (2004), 235-240.

X. Huang, R. Ueji, N. Tsuji, N. Hansen

Misorientation change during annealing of Al heavily deformed by accumulative roll-bonding (ARB)

Transactions of the Materials Research Society of Japan, 29(2004), 3507-3510.

X. Huang, N. Hansen

Flow stress and microstructures of fine grained copper

Material Science and Engineering A, 387(2004), 186-190.

O. Hansen, X. Huang, G. Winther, Q. Xing

Deformation microstructures and their orientation dependency

The Minerals, Metals & Materials Society Letters, 1(2004), 73-74.

N. Hansen, X. Huang, R. Ueji, N. Tsuji

Structure and strength after large strain deformation

Material Science and Engineering A, 387(2004), 191-194.

O. Hansen, X. Huang, D.A. Hughes

Deformation microstructures

3rd International Symposium on Ultrafine Grained Materials, (2004), 67-74.

A. Haldar, X. Huang, T. Leffers, N. Hansen, R.K. Ray

Grain orientation dependence of microstructures in a warm rolled IF steel

Acta Materialia, 52(18) (2004), 5405-5418.

Haldar, X. Huang, T. Leffers, N. Hansen, R.K. Ray

Grain orientation effect on the three dimensional morphology of microstructures in a warm-rolled IF steel

25th Risø International Symposium on Materials Science: Evolution of Deformation Microstructures in 3D, (2004), 329-336.

2003

G. Winther, X. Huang

Boundary characteristics in heavily deformed metals

Advanced Engineering Materials, 5(5)(2003), 317-322.

J. A. Wert, X. Huang, F. Inoko

Deformation bands in a [110] aluminium single crystal strained in tension

Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, 459(2029)(2003), 85-108.

J.A. Wert, X. Huang

Extended planar boundary inclinations in fcc single crystals and polycrystals subjected to plane strain deformation

Philosophical Magazine, 83(8)(2003), 969-983.

R. Ueji, X. Huang, N. Hansen, N. Tsuji, Y. Minamino

Quantitative analysis of structure-strength relation of commercial purity aluminium deformed by accumulative roll bonding and annealed at low temperature

Materials Science Forum, 426(2003), 405-410.

T. Okada, X. Huang, K. Kashihara, F. Inoko, J.A. Wert

Crystal orientations before and after annealing in an Al single crystal strained in tension

Acta Materialia, 51(7) (2003), 1827-1839.

D. A. Hughes, X. Huang, N. Hansen

Quantification and analysis of deformation microstructures

1st International Symposium on Metallurgical Modeling for Aluminum Alloys, (2003), 137-144.

X. Huang, G. Winther, N. Hansen, T. Hebesberger, A. Vorhauer, R. Pippan, M. Zehetbauer

Microstructure of nickel deformed by high pressure torsion to high strains

Materials Science Forum, 426(2003), 2819-2824.

X. Huang, N. Tsuji, N. Hansen, Y. Minamino

Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

Material Science and Engineering A, 340(1-2)(2003), 265-271.

X. Huang, N. Hansen

Microstructural evolution during plastic deformation of metals

Current Advance in Materials and Process, 16(6)(2003), 1284-1287.

X. Huang, N. Hansen

Dislocation structures in tensile deformed copper of various grain sizes

International Conference on Strength of Materials, (2003).

X. Huang

TEM characterization of deformation induced nanostructures

Autumn Meeting of the Japan Institute of Metals, (2003).

X. Huang

Orientation and misorientation in deformation induced nanostructure

Croatian Society for Electron Microscopy, (2003), 189-190.

N. Hansen, X. Huang

Strength and structure after large strain deformation

13th International Conference on the Strength of Materials, (2003).

2002

Thorning, J.A. Wert, X. Huang

Experimental observations of local crystal orientation distributions in strained single and polycrystals

1st Joint Chinese-Danish Symposium: Characterisation of Microstructures, (2002), 59-60.

Q. Liu, X. Huang, D.J. Lloyd, N. Hansen

Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains

Acta Materialia. 50(15)(2002), 3789-3802.

X. Huang, N. Tsuji, N. Hansen, Y. Minanino

Microtexture of lamellar structures in Al heavily deformed by accumulative roll-bonding (ARB)

Materials Science Forum, 408(2002), 715-720.

X. Huang

Determination of Sigma 3 boundary planes in bulk copper samples with different textures

Materials Science Forum, 408(2002), 493-498.

X. Huang

Change of planar structure trace direction induced by sample tilting in TEM

1st Joint Chinese-Danish Symposium: Characterisation of Microstructures, (2002), 37-38.

N. Hansen, X. Huang, D.A. Hughes

High strain monotonic deformation-structure and strength

2nd International Symposium on Ultrafine Grained Materials, (2002), 3-14.

2001

G. Winther, X. Huang, S. Fæster Nielsen, J.A. Wert

Dislocation boundaries and slip systems in uniaxially deformed crystals

Materials Research Society Online Proceedings Library- Material Instabilities and Patterning in Metals, 683(2001), BB1-8.

G. Winther, N. Hansen, T. Hebesberger, X. Huang, R. Pippan, M. Zehetbauer

Dislocation structure of Ni deformed by high pressure torsion

22nd Risø International Symposium on Materials Science: Science of Metastable and Nanocrystalline Alloys: Structure, Properties and Modelling, 22(2001), 435-440.

T. Okada, L. Ikeda, X. Huang, J.A. Wert, K. Kashihara, F. Inoko

Electron backscatter diffraction analysis of recrystallized grains formed in deformation band in aluminum single crystal

Materials Transactions, 42(9)(2001), 1938-1944.

Mishin, X. Huang, J.R. Bowen, D. Juul Jensen

Assessment of microstructural characterisation of heavily deformed materials by electron microscopy

22nd Risø International Symposium on Materials Science: Science of Metastable and Nanocrystalline Alloys: Structure, Properties and Modelling, 22(2001), 335-340.

X. Huang, N. Tsuji, Y. Minamino, N. Hansen

Characterisation of ultrafine microstructures in aluminium heavily deformed by accumulative roll-bonding (ARB)

22nd Risø International Symposium on Materials Science: Science of Metastable and Nanocrystalline Alloys: Structure, Properties and Modelling, 22(2001), 255-262.

X. Huang, T. Okada, J.A. Wert, F. Inoko

Deformation structure and recrystallization in an Al single crystal deformed in tension

1st Joint International Conference on Recrystallization and Grain Growth, (2001), 773-778.

X. Huang, D.C. Gao, W.Y. Yang, Z.Q. Sun

Recrystallization of Fe3Al based alloys during superplastic deformation

1st Joint International Conference on Recrystallization and Grain Growth, (2001), 875-880.

X. Huang, A. Borrego, W. Pantleon

Polycrystal deformation and single crystal deformation: dislocation structure and flow stress in copper

Materials Science and Engineering: A, 319(2001), 237-241.

N. Hansen, X. Huang, D.A. Hughes

Microstructural evolution and hardening parameters

Materials Science and Engineering: A, 317(1-2) (2001), 3-11.

D.C. Gao, W.Y. Yang, X. Huang, Z.Q. Sun

The superplasticity of Fe-28Al-5Cr and Fe-28Al-5Cr-0.5Nb-0.1C alloys

Acta Metallurgica Sinica, 37(2001), 291-295.

D.C. Gao, W.Y. Yang, X. Huang, Z.Q. Sun

Superplastic deformation in a coarse-grained Fe3Al based alloy

Scripta Materialia, 44(3)(2001), 501-505.

X. Huang, A. Borrego, W. Pantleon

Polycrystal deformation and single crystal deformation: Dislocation structure and flow stress in copper

Materials Science and Engineering: A, 319-321(2001), 237-241.

2000

G. Winther, X. Huang, N. Hansen

Crystallographic and macroscopic orientation of planar dislocation boundaries - Correlation with grain orientation

Acta Materialia, 48(9)(2000), 2187-2198.

N.H. Pryds, X. Huang

The effect of cooling rate on the microstructures formed during solidification of ferritic steel

Metallurgical and Materials Transactions A, 31(12)(2000), 3155-3166.

Q. Liu, B.L. Li, W. Liu, X. Huang

Deformation structure evolution of IF steel during cold-rolling

21st Risø International Symposium on Materials Science: Recrystallization: Fundamental Aspects and Relations to Deformation Microstructure, 21(2000), 423-430.

X. Huang, J.A. Wert, H.F. Poulsen, N.C. Krieger Lassen, F. Inoko

Characterization of deformation structure and recrystallization in a tensile deformed [110] aluminum single crystal

21st Risø International Symposium on Materials Science: Recrystallization: Fundamental Aspects and Relations to Deformation Microstructure, 21(2000), 359-364.

X. Huang, N.H. Pryds

Crystallography and morphology of cementite precipitates formed during rapid solidification of a ferritic stainless steel

Acta Materialia, 48 (16)(2000), 4073-4082.

1999

G. Winther, X. Huang, N. Hansen

Characterisation and implications of grain orientation dependent dislocation boundaries

20th Risø International Symposium on Materials Science: Deformation Induced Microstructures: Analysis and Relation to Properties, 20(1999), 541-546.

J.A. Wert, X. Huang, F. Inoko, T. Okada, N. Hansen

Observation and analysis of deformation microstructures in a [110] Al single crystal deformed in tension

20th Risø International Symposium on Materials Science: Deformation induced microstructures: Analysis and relation to properties, 20(1999), 529-534.

Mishin, X. Huang

TEM study of twin segments in annealed copper

Materials Science Forum, 294(1999), 401-404.

Mishin, X. Huang

Characteristics of Σ3 boundaries in strongly textured copper

International Conference on Textures of Materials, (1999), 1613-1618.

Q. Liu, X. Huang, D.J. Lloyd, N. Hansen

Microstructural characterization of AA1200 highly strained by cold-rolling

4th International Conference on Recrystallization and Related Phenomena, (1999), 315-319.

X. Huang, T. Leffers, N. Hansen

Comparison between microstructural evolution in aluminum and copper deformed by cold rolling

20th Risø International Symposium on Materials Science: Deformation-induced microstructures: Analysis and relation to properties, 20(1999), 365-374.

1998

X. Huang, Q. Liu, N. Hansen

Grain subdivision on different length scales during plastic deformation

19th Risø International Symposium on Materials Science: Modelling of Structure and Mechanics of Materials from Microscale to Product, 19(1998), 299-306.

X. Huang, Q. Liu

Determination of crystallographic and macroscopic orientation of planar structures in TEM

Ultramicroscopy, 74(3)(1998), 123-130.

X. Huang

Grain orientation effect on microstructure in tensile strained copper

Scripta Materialia, 38(11)(1998), 1697-1703.

N. Hansen, X. Huang

Microstructure and flow stress of polycrystals and single crystals

Acta Materialia, 46(5)(1998), 1827-1836.

1997

N.H. Pryds, X. Huang

Planar colony of needle precipitates formed during solidification of a ferritic stainless steel

Scripta Materialia, 36(11)(1997), 1219-1226.

X. Huang, N. Hansen

Grain orientation dependence of microstructure in aluminium deformed in tension

Scripta Materialia, 37(1)(1997), 1-7.

N. Hansen, X. Huang

Dislocation structures and flow stress

Materials Science and Engineering: A, 234(1997), 602-605.

N. Hansen, X. Huang

Polycrystalline deformation - microstructural parameters and flow stress

International Conference on the Quantitative Description of Materials Microstructure, (1997), 155-163.

1996

K. Tsuzaki, X. Huang, T. Maki

Mechanism of dynamic continuous recrystallization during superplastic deformation in a microduplex stainless steel

Acta Materialia, 44(11)(1996), 4491-4499.

X. Huang, K. Tsuzaki, T. Maki

Change in boundary misorientation with subgrain growth in a microduplex stainless steel

Materials Science Forum, 204(1996), 417-422.

N. Hansen, D. Juul Jensen, X. Huang, A. Bunsch

Deformation induced changes in microstructure, local orientation and bulk texture

11th International Conference on Textures of Materials: Texture of Materials, 2(1996), 1331-1338.

1995

X. Huang, K. Tsuzaki, T. Maki

Subgrain growth and misorientation of the α-matrix in an (α+γ) microduplex stainless-steel

Acta Metallurgica et Materialia, 43(9)(1995), 3375-3384.

X. Huang, K. Tsuzaki, T. Maki

Effect of initial structure on recrystallization of the α-matrix in an (α+γ) microduplex stainless-steel

Scripta Metallurgica et Materialia, 33(3)(1995), 341-346.

1992

L. Qing, X. Huang, M. Yao

TEM method for rapid and precise evaluation of continuous recrystallization

Materials Characterization, 29(3)(1992), 271-276.

Q. Liu, X. Huang, M. Yao, J.F. Yang

On deformation-induced continuous recrystallization in a superplastic Al-Li-Cu-Mg-Zr alloy

Acta Metallurgica et Materialia, 40(7)(1992), 1753-1762.

Q. Liu, X. Huang, M. Yao

New method for determining grain-boundary parameters

Ultramicroscopy, 41(4)(1992), 317-321.

1991

Q. Liu, X. Huang, J.F. Yang, M. Yao

Microstructural changes during superplastic deformation of an Al-Li-Cu-Mg-Zr alloy

Journal of Materials Science Letters, 10(13)(1991), 779-782.

Q. Liu, X. Huang, J.F. Yang, M. Yao

Mechanical twinning during superplastic deformation of an Al-Li-Cu-Mg-Zr alloy

Journal of Materials Science Letters, 10(16)(1991), 932-934.

Q. Liu, X. Huang, J.F. Yang, M. Yao

The characteristics of cavitation during superplastic deformation of a warm-rolled Al-Li-Cu-Mg-Zr alloy

Scripta Metallurgica et Materialia, 25(2)(1991), 387-392.

X. Huang, Q. Liu, C.K. Yao, M. Yao

Superplasticity in a SiCw-6061Al composite

Journal of Materials Science Letters, 10(16)(1991), 964-966.